18v cordless angle grinder with 2 batteries (4 pages)
Summary of Contents for Marksman 67002c
Page 1
INSTRUCTION MANUAL 67002c Read all the instruction carefully before you use the appliance and keep it for future use. 2000w Angle grinder 230V~50Hz 2000w 6000rPM 230MM disc 13 AMP fuse (max) must be fitted to plug attached to this cable.
Page 3
• Keep children away. • Do not let other people touch the tool or the cable. • Keep other people out of the working area! Make sure that the tool is stored . safely. • Unused electric tools are to be kept in a dry, secure place, out of the reach of children. •...
• Damaged switches are to be replaced in a customer service shop! Do not use electric tools that cannot be switched on or off. WARNING! • For your own safety always use only the accessories and attachments specified in the operating instructions or recommended or specified by the tool manufacturer! •...
IMPORTANT: Only ever press the spindle lock when the motor and grinding spindle are at standstill. The spindle lock must be kept pressed while the wheel is changed. For grinding or cutting wheels up to approx. 3 mm thick, screw on the flange nut with the flat side facing the grinding or cutting wheel.
cleaning and care • Before cleaning the machine I remove the mains plug from the socket and turn the on and off switch (1) to position (0) ! • For cleaning purposes, only use a slightly damp but not wet cloth! •...
Page 7
and adjusting wrenches are removed from tool before turning it on. 16. Avoid unintentional starting - Don’t Carry plugged-in tool with finger on switch. Be sure switch is off when plugging in. 17. Outdoor use extension cords - When tool is used outdoors, use only extension cords intended for use outdoors and so marked.
UK plUg REwIRINg Your appliance operates on 220-240V-SOHz AC Mains and comes fitted with a 3-pin BSI Approved plug, so that it is ready for use by simply plugging into AC Mains. Should you need to change or refit a plug, proceed as follows: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code:...