PORTMAN 4180069TI Instructions

PORTMAN 4180069TI Instructions

In-vehicle system antenna

Advertisement

Quick Links

4180069TI MANUAL
1. Antenna Model : 4180069TI
2. Technology: Lora 2-WAY
3. Max Range : 2 miles
4. LED : status indication
5. Button: setup key
6
Connect to Host (To plug Weblink or RF-Decoder/Antenna)
pin1- Rx (Data from antenna, 0-5 Volts)
pin2- Tx (Data from Host, 0-5 Volts)
pin3- GND (Ground from Host)
pin4- 12V (Power from Host, 12V )
The Control Center,typically located on the upper part of the front windshield.It consists of:
The In-vehicle system antenna.
The Status LED,as a visual indicator of the system's status.
The Control button,for placing the system into Valet Mode and to perform the Emergency
Override operation.
This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated with a minimum distance of 25cm between the
radiator and any part of your body.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4180069TI and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for PORTMAN 4180069TI

  • Page 1 4180069TI MANUAL 1. Antenna Model : 4180069TI 2. Technology: Lora 2-WAY 3. Max Range : 2 miles 4. LED : status indication 5. Button: setup key Connect to Host (To plug Weblink or RF-Decoder/Antenna) pin1- Rx (Data from antenna, 0-5 Volts)
  • Page 2 FCC Statement This device complies with FCC Rules part 15. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference that may be received, including interference that may cause undesired operation.

Table of Contents