Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Rostra 250-8274
- Page 1 Installation / Owner’s Guide 250-8274 REV: 0...
- Page 2 Your first priority while driving should always be the safe operation of your vehicle. Rostra and it parent company, Voxx Electronics Corporation, cannot accept any responsibility whatsoever for accidents resulting from failure to observe these precautions or safety instructions.
-
Page 3: Product Description
System Layout Product Description This mirror design integrates multiple camera views onto your vehicle’s rear view mirror. The mirror is designed to mount on any vehicle with a universal “Wedge” style mount. Additional adapters may be required. All vehicle specific adapters are sold separately. Video 1 (Front) Input Video 2 (Left) Trigger - Pink Video 2 (Left) Input... -
Page 4: Wire Harness Installation
There are many methods to remove the original rear view mirror, however, please don’t force the mirror off the bracket. Rostra will not be responsible for damage caused to your vehicle by incorrect installation of the mirror. Please refer to the OEM mirror or vehicle manufacturer for the correct removal procedure. - Page 5 Installation (CONT) Power / Ground Inputs: The Red and Black wires are the main power supply for the mirror system. This system may operate using a maximum of two amps (2A) of current. Be sure to connect this to a vehicle circuit that can handle the additional power requirement.
- Page 6 Installation (CONT) Wire Harness Installation Page 6...
- Page 7 Installation (CONT) Mirror Installation (Universal Wedge Mount) Windshield 1. Remove the original mirror and prepare 250-8273 for installation • Inspect all parts of the 250-8273 to ensure no defects are present before installation • Using a supplied Torx wrench, loosen mounting set screw. 2.
- Page 8 2. Use the supplied Torx wrench to secure the mirror to the universal wedge mount. Note: Always use caution, DO NOT force the mount. Rostra will not be responsible for broken windshields. If you are not sure how to remove or re-install the mirror seek trained, qualified help.
- Page 9 Parking Line Adjustment About Parking Guide Lines Generally, to help drivers estimate the distance from obstacles, there are three lines for reference; red, yellow and green. These lines are displayed on the monitor when reversing. The green line is 3m away from the back of car and the yellow line is 2m.
-
Page 10: Operation
Operation Mirror Controls 1. Video Channel: Switch between available camera views. 2. Function Button: Selection Left/Down 3. Menu Access (Grid Line Adjustment) 4. Light Sensor 5. Power Button: Display On/Off 6. Indicator 7. Function Button: Selection Right/Up 8. Menu Select Preferred Camera View The Preferred Camera View can be used to quickly access the camera view that is most helpful to the user (Example: Front Camera View. - Page 11 Operation Manual Display Control This system can display each video input manually. This can be helpful to monitor the vehicle’s blind spot when driving on the highway. • Using Mirror Control: Press the “CH” button on the mirror to cycle though the available camera views.
-
Page 12: Display Modes
Display Modes Available Display modes: VIDEO 1 VIDEO 4 VIDEO 2 VIDEO 3 VIDEO 2 VIDEO 4 VIDEO 4+VIDEO 1 mode Page 12... - Page 13 Notes Page 13...
- Page 14 Notes Page 14...
-
Page 15: Warranty
Warranty 36 MONTH LIMITED WARRANTY Voxx Electronics Corporation (the Company) warrants to the original purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 36 months from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned prod- uct, (at the Company’s option) without charge for parts or repair labor. - Page 16 © 2022 Voxx Electronics Corp., 2351 J. Lawson Blvd. Orlando, FL 23824...