Neptune SOLAR PIR PATH LIGHT User Manual

NEPTUNE NEPTUNE
SOLAR PIR PATH LIGHT SOLAR PIR PATH LIGHT
W W E E
S S
Ensure your solar Ensure your solar
panel is South facing panel is South facing
or as near as possible or as near as possible
Thank you for choosing the Neptune Solar PIR Path Light. Please read these instructions carefully Thank you for choosing the Neptune Solar PIR Path Light. Please read these instructions carefully

Important notes

Important notes
Always take care when installing your light. If you are at all unsure, please contact your retailer or a professional trades person for Always take care when installing your light. If you are at all unsure, please contact your retailer or a professional trades person for
advice. advice.

Installation

Installation
Remove all packaging and put to one side. Please carefully consider Remove all packaging and put to one side. Please carefully consider
where you wish to install your light before making alterations to your where you wish to install your light before making alterations to your
property. It's particularly important that the solar panel receives as much property. It's particularly important that the solar panel receives as much
sunlight as possible. Ensure that it is not obstructed by buildings, fences, sunlight as possible. Ensure that it is not obstructed by buildings, fences,
trees, sheds, etc, or the shadows that these create. If the solar panel is trees, sheds, etc, or the shadows that these create. If the solar panel is
installed in a poor location, it may not perform to the best of its ability. installed in a poor location, it may not perform to the best of its ability.
To maximise the battery capacity, the lights should be charged in direct sunlight for at least 12-24 hours before being used To maximise the battery capacity, the lights should be charged in direct sunlight for at least 12-24 hours before being used
for the �rst time for the �rst time
The lights will turn ON/OFF automatically when left in the on position. Please note it is completely normal for the lights to The lights will turn ON/OFF automatically when left in the on position. Please note it is completely normal for the lights to
come on at di�erent times as it depends on how fast they charge in their location. Please note your light will not turn on if it is come on at di�erent times as it depends on how fast they charge in their location. Please note your light will not turn on if it is
daylight, to test your light is working take it into a dark room or use a cloth to cover the solar panel. daylight, to test your light is working take it into a dark room or use a cloth to cover the solar panel.

Assembly

Assembly
You will locate the on/o� switch on the underside of the light head You will locate the on/o� switch on the underside of the light head
Assemble the poles together, choose your desired height and connect to the Assemble the poles together, choose your desired height and connect to the
stake mount provided. Place your Path Light into soft ground, ensuring suitable stake mount provided. Place your Path Light into soft ground, ensuring suitable
daylight exposure to charge the solar panel. daylight exposure to charge the solar panel.

Troubleshooting

Troubleshooting
Please ensure that there are no nearby light sources shining on the solar panel after dark. These could be bright indoor/outdoor Please ensure that there are no nearby light sources shining on the solar panel after dark. These could be bright indoor/outdoor
lights from your property or neighbours, or streetlights. lights from your property or neighbours, or streetlights.
If you are unsure, take the light inside and test it in a dark room. If you are unsure, take the light inside and test it in a dark room.
Clean your solar Clean your solar
panel from time panel from time
to time to time
before using your light. before using your light.
USER GUIDE USER GUIDE
Do NOT place your Do NOT place your
solar panel in shaded solar panel in shaded
areas. areas.
Do NOT charge Do NOT charge
behind glass behind glass