Subscribe to Our Youtube Channel
Summary of Contents for BLASTONE Rotoblast
- Page 1 INSTALLATION, OPERATION & MAINTENANCE MANUAL Rotoblast Internal Pipe Cleaner www.BlastOne.com...
- Page 2 MANUAL CONTENTS INTRODUCTION Description Set-Up and Operation MAINTENANCE Leather Dust Seal (Pos.10) Tungsten Carbide Washer (Pos.12) Nozzles (Pos.29-33) Nozzle Head (Pos.1) and Plug (Pos.2) Brake Lining (Pos.5) Lockring / Bearing Seal (Pos.7 & Pos.9) TROUBLESHOOTING Troubleshooting WARNING 1. Use protective equipment: Abrasive-resistant clothing, safety shoes, leather gloves, ear protection, CE-approved air-fed helmet.
- Page 3 INTRODUCTION DESCRIPTION The Rotoblast tool cleans the interior of pipes up to 40’ long and ranging in size from 8” (210 mm) to 35” (890 mm) I.D. The tool connects to most abrasive blasting machines in place of a standard nozzle.
- Page 4 (pos.13) at the rear of the unit and lock it with the locking nut (pos.14) for the rear end plate (pos.11) Couple the blast hose to one end of the pipe lance and the Rotoblast to the other end with CFT couplings (pos.22-23) (or leave the lance out). Pipes to be cleaned can be kept in stacks.
- Page 5 MAINTENANCE LEATHER DUST SEAL (POS.10) The seal must be kept under adequate pressure to protect the bearings. It must never be allowed to wear trough. On a new tool with your choice of abrasive, check the leather dust seal every 3 hours for wear.
- Page 6 Oil residue on brake lining. Clean both brake & housing. Damaged leather dust seal. Change leather dust seal. Rotoblast runs too slow and hooks at Damaged brake shoe and / or lining. Change complete brake shoe (pos.5) point in the cycle.
- Page 7 TROUBLESHOOTING...
- Page 8 BLASTONE INTERNATIONAL (AUST) PTY LTD BLASTONE INTERNATIONAL 57 Alexandra Place Murarrie 4510 Bridgeway Avenue Queensland 4172 Australia Columbus Ohio 43219 USA Toll Free 800 999 1881 PO Box 3385 Tingalpa DC Tel (614) 476 3000 Queensland 4172 Australia Fax (614) 476 3002 Email sales@blastone.com...
Need help?
Do you have a question about the Rotoblast and is the answer not in the manual?
Questions and answers