Larson Electronics SCR-10IN-LCD-1080P-12V Instruction Manual

Compatible with DVR and NVR Series - 12V - Works With BNC, VGA, RCA, or
Thank you for your purchase of the Larson Electronics SCR-10IN-LCD-1080P-12V.
WARNING:
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
CRITICAL SAFETY INSTRUCTIONS:
• INSTALLATION SHOULD ONLY BE CONDUCTED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH NEC AND ANY
RELEVANT LOCAL BUILDING CODES.
• RISK OF FIRE OR ELECTRIC SHOCK. FIXTURE INSTALLATION REQUIRES KNOWLEDGE OF FIXTURE'S ELECTRICAL
SYSTEMS. IF NOT QUALIFIED, CONTACT A QUALIFIED ELECTRICIAN.
• BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.
MAKE SURE THE SUPPLY VOLTAGE IS THE SAME AS THE FIXTURE'S RATED VOLTAGE.
•
• TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR SHARP
OBJECTS. SUITABLE FOR DAMP LOCATIONS.
IMPORTANT
READ CAREFULLY BEFORE INSTALLING THIS FIXTURE. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. THE SCR-10IN-LCD-1080P-12V MUST BE WIRED IN ACCORDANCE WITH NATIONAL ELECTRICAL
CODE AND ALL APPLICABLE LOCAL CODES. PROPER GROUNDING IS REQUIRED FOR SAFETY.
WE STRONGLY ENCOURAGE ONLY A LICENSED ELECTRICIAN INSTALL, OPERATE AND MAINTAIN THIS
PRODUCT. IF YOU ARE NOT QUALIFIED OR UNFAMILIAR WITH ANY ASPECT OF THIS INSTRUCTION SHEET,
CONSULT AN ELECTRICIAN. THERE ARE NO SERVICEABLE PARTS INSIDE.
WARNING: MAKE SURE POWER IS TURNED OFF BEFORE STARTING THE
INSTALLATION OR PERFORMING ANY MAINTENANCE.
RISK OF FIRE/ELECTRIC SHOCK –
RISK OF PERSONAL INJURY –
RISK OF BURN –
ALLOW FIXTURE TO COOL BEFORE SERVICING.
The SCR-10IN-LCD-1080P-12V from Larson Electronics is a 10" 1080p LCD Display Screen that is ideal for viewing cameras and is
compatible with our NVR Network Video Recorder series and our Analog DVR series. This glossy, hard coated LCD display screen
produces excellent sound quality with integrated speakers. The SCR-10IN-LCD-1080P-12V operates on 12 V voltage and is ideal for
mounting in vehicles.
Low Voltage DC
Connect power to power supply outputting low voltage at 12 Volts DC. This variable voltage allows greater versatility
without affecting light output. Ensure deutsch connectors are properly connected (If applicable).
INTERFACE AND KEYS
Larson Electronics, LLC
10" LCD 1080P Display Screen
HDMI Inputs
Instruction Manual
DISCONNECT POWER AT BREAKER BEFORE INSTALLING OR SERVICING.
FIXTURE MAY BECOME UNSTABLE OR DAMAGED IF NOT INSTALLED PROPERLY.
.
. . .
�=
�
- _ -
)
s,
. .
�
� (£;� .. -.
. : : ..
� r
- � t���:¾-
I
Video Input•--'
Selection
Phone: (800) 369-6671
. - . ...
. .
.
i
•
---- -• Increase
Menu · : •
Analog Variable Decrease
Power ON/OFF
Fax: (903) 498-3364
SCR-10IN-LCD-1080P-12V
Analog Variable
www.larsonelectronics.com
1 of 2