Fig. 59: Fitting The Filter Silencer; Table 43: Tightening Torque (72004) - ABB XAC19590 Operation Manual

Operation Manual / 4 Product description / A200-L
8 Disassembly and assembly / 8.13 Fitting the filter silencer
8.13.3 Fitting the filter silencer (cast)
Fig. 59: Fitting the filter silencer
Part number
72004
Table 43: Tightening torque (72004)
1. Attach the lifting gear to the front lug and rear eyelet of the filter silencer (81000).
2. Position filter silencer on compressor casing.
3. Fit nuts (72004) with washers (72003) and tighten.
Fit insulation as far as necessary.
u
© Copyright 2018 ABB. All rights reserved.
A265-L A270-L
M14 M16
130 Nm 200 Nm
HZTL4036_EN
A275-L A280-L
M18 M20
300 Nm 420 Nm
Revision M August 2018