Advertisement
Product Name:
SKU #:
Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest
standards of safety and quality.
Prior to use, the solar panel must be turned on.
Lift the solar panel from the top of the bollard base. On the underside of the lid, there is an On/Off switch. Move
the switch to "On", and place panels back on each statue.
To replace the battery:
Remove the solar panel disk from the top of the bollard light. On the underside of the disk, remove screws to
replace the battery.
Battery type: AA Ni-MH 300mAh 1.2V
Metal/MgO 11.8in. H Gray Solar Bollard Light
WHSL1047
Contact: sales@winsomehouse.com
Instruction Manual
Please save this manual for future reference.
Advertisement
Table of Contents
Summary of Contents for LuxenHome WHSL1047
- Page 1 Product Name: Metal/MgO 11.8in. H Gray Solar Bollard Light SKU #: WHSL1047 Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest standards of safety and quality. Prior to use, the solar panel must be turned on.
- Page 2 Product Name: Metal/MgO 11.8in. H Gray Solar Bollard Light SKU #: WHSL1047 Trouble Shooting Tips: If your solar light does not turn on at night, it may be caused by the following: 1. Check to see if the switch is in the “OFF” position.
Need help?
Do you have a question about the WHSL1047 and is the answer not in the manual?
Questions and answers