Advertisement
FREQUENTLY ASKED
QUESTIONS
Q. How do I turn on my lights?
A. Wired correctly, the lights will require the high beams to be turned on
before the switch will activate the lights.
Q. How do I adjust the tilt of the driving lights?
A. Loosen the bolts either side of the lights to the point where the lights are
tiltable. From there you'll be able to angle the light to your desired position.
Q. What's the best way to clean my lights?
A. Keeping the lenses of the light clean will increase the performance of the
light. We recommend using a sponge and a bucket of warm soapy water to
wash the lights down. Please note, that using a solvent-based cleaner is not
recommended and may void the warranty of the light.
Q. My driving lights are working only while on the low beam setting.
Why is it doing this?
A. Depending on the make of your vehicle the lights may need to be wired
differently. In this case, we recommend contacting the manufacturer, or,
alternatively, getting an auto electrician to wire the lights in.
Q. The lights don't seem to be working correctly. What do I do?
A. There are typically a few reasons why this would be the case:
1) The lights have been incorrectly wired up - we would recommend getting
a qualified auto electrician to get this set up for you.
2) Each vehicle is wired differently. For every installation, we recommend
contacting the manufacturer to check on the best way to wire the lights in.
3) Check the fuse and relays. For the fuse, if you're seeing a gap in the wire
or a dark smear this'll mean that it's blown and needs replacing. To test the
relay, we recommend connecting it up to a multimeter.
Have another question for us? We're happy to help.
You can get in contact with our support team via the email:
info@hardkorr.com
9
9
Advertisement
