Advertisement
Intended Use
Your Aidapt Eye Drop Dispenser has been designed to assist you when self-administering eye drops.
Installing Eye Drop Bottle
1. Open the body of the eye drop dispenser using the thumb guides.
2. Place bottle inside the dispenser so that the ridge fits firmly around the neck of the bottle.
3. Loosen the top of the eye drops but do not remove fully.
4. Close the dispenser by clicking its sides together securely.
IF YOU SUSPECT THE UNIT TO BE FAULTY, PLEASE DO NOT USE AND CONTACT YOUR SUPPLIER
USAGE INSTRUCTIONS
1.
Place your dispenser in an upright position and open the eyepiece.
2.
Remove the cap from eye drop bottle and close the eyepiece.
3.
Tilt your head back and place eyepiece securely over the eye ensuring that the lip of the eyepiece is resting gently against the upper eye
socket.
4.
Use your finger to pull down the lower eyelid.
5.
Gently squeeze the dispenser to administer the eye drops. One squeeze per drops.
6.
When finished open the eyepiece and screw the bottle cap back on.
VM925E – Eye Drop Dispenser
IMMEDIATLEY.
Advertisement
Table of Contents
Related Manuals for aidapt VM925E
Summary of Contents for aidapt VM925E
- Page 1 VM925E – Eye Drop Dispenser Intended Use Your Aidapt Eye Drop Dispenser has been designed to assist you when self-administering eye drops. Installing Eye Drop Bottle 1. Open the body of the eye drop dispenser using the thumb guides. 2. Place bottle inside the dispenser so that the ridge fits firmly around the neck of the bottle.
- Page 2 If your product arrives damaged, you must contact the retailer from whom you bought it. The retailer's contact details will be on the invoice that arrived with the product, or on the e-mail you received when you placed the order. Do not contact Aidapt, only your retailer can arrange a replacement.
Need help?
Do you have a question about the VM925E and is the answer not in the manual?
Questions and answers