Page 5
Step 4: After removing the USB flash drive from the computer normally, connect it to the USB port of EDA-253C on the power off. Step 5: After powering up EDA-253C and seeing the RS Logo twice (the Logo will appear in about 2 minutes), it indicates that the USB is detected, will start playing images imported from the USB.
Page 11
Step 11: Select the EDA-253C you want to play, click "Next" and then click "Proceed" to complete Publish. Step 12: After publishing is completed, confirm whether the screen of EDA-253C has been switched to RapidSignage Logo, indicating that the content is correctly published to EDA-253C.