Twoey Glo CS0761 Manual

GLO TABLE
Epilepsy sufferers should use this product with care.

UV LIGHT PEN

This product is supplied with a UV light pen (CE Labelled) for use with
the Glo element of the product. The built in invisible ink marker
should not be used on the Glo material or any fabric as it will
permanently mark it.
The marker is suitable for use with paper or dry wipe board and
reacts to UV light.

About.

This Glo board gives an instant visual identifier in darkness.
It recharges by exposure to the sun, ambient room light or a UV light
source. Its uses safe non-toxic material which is REACH compliant
Assembly Instructions.
Please read these instructions carefully before assembling the unit
and where necessary refer to the enclosed Component List.
Additional Tools Required.

Maintenance.

Some residual dust from the manufacturing process may be apparent
This will wipe off with a damp cloth.
Your unit may be cleaned with a damp cloth.
Stubborn marks may be removed with a mild detergent or
Non-abrasive cream cleaner.
Examine all fasteners periodically and retighten where necessary.
Care must be taken not to over tighten the fasteners.
An Adult Should ALWAYS SUPERVISE PLAY!
This unit is designed for use on a flat level surface.
Please retain our address for future reference
5140 - Glo Table CS0761
5140

Important Notes!

Adults Required for Assembly.
Manufactured by:
Mike Miller Associates Ltd.,
Syke Road, Wigton. Cumbria CA7 9NS
Tel: 016973 49774/45300 Fax: 016973 45511
Email: info@twoey.co.uk
Website: www.twoeytoys.com
Registered in England No: 1425839
Registered Office: The Old Brewery, Caldbeck.
Cumbria CA7 8EW
04/06/20
.