Advertisement
Manufacturer / distributor:
VacuumChambers.eu
drControl Dawid Roszczenko
Jodłowa 3A/34
16-001 Ignatki-Osiedle
Poland
E-mail: shop@vacuumchambers.eu; Tel.: +48535312207
BEFORE USING, PLEASE READ THIS OPERATING MANUAL. Keep the manual for possible future use, as it may
always be necessary to remember the information contained in the manual, and it must be provided with the
device in the event of reselling the machine or changing the user.
WARNING! In order to avoid the risk of injuries and accidents, as well as to increase work efficiency and
prevent premature failure of the device, read all warnings, safety instructions and paragraphs marked with
the symbol:
Do not dispose of that product as unsorted municipal waste.
Used equipment should be sent to an electro-waste collection point.
Nature friendly company.
All photos used in this manual are illustrative photos. The appearance and quantity of the elements supplied to the
customer, as well as their mutual location may vary depending on the ordered vacuum piston pump.
This operating manual is based on current knowledge and experience. The manufacturer reserves the right to change the
content of this manual without informing the consumer.
Contents
................................................................................................................................................................ 3
............................................................................................................................. 3
A.
Pressure Regulation. .............................................................................................................................................................. 4
.................................................................................................................................................................... 4
A.
Vacuum Gauge. ...................................................................................................................................................................... 5
.............................................................................................................................................................................. 5
.................................................................................................................................................. 6
............................................................................................................................................................................. 7
A.
Cleaning And Replacing The Air Intake Filter. ......................................................................................................................... 7
................................................................................................................................................................................... 8
2
Advertisement
Table of Contents
Related Manuals for VacuumChambers DVPGM033A
Summary of Contents for VacuumChambers DVPGM033A
- Page 1 Pressure regulation................................4 ..................................4 Vacuum gauge..................................5 ....................................5 Manufacturer / distributor: ..............................6 VacuumChambers.eu ..................................... 7 drControl Dawid Roszczenko Jodłowa 3A/34 Cleaning and replacing the air intake filter.......................... 7 16-001 Ignatki-Osiedle ....................................8 Poland E-mail: shop@vacuumchambers.eu; Tel.: +48535312207...
- Page 2 Vacuum pumps are used in the degassing of materials such as: silicone, resin, gypsum, and in the impregnation of wood and Pumps available from VacuumChambers.eu are equipped with internal sealing made of NBR (nitril butadien rubber) or PTFE other porous materials. These pumps can be widely used in medical equipment, automotive industry, automation, printing (teflon).
- Page 3 A. Vacuum gauge. The rate of pressure drop during venting gradually decreases. However, if it is not possible to achieve a negative pressure at the level declared by the distributor, it may indicate the vacuum set leak. The vacuum gauge indicates the pressure in the air intake pipe. For this indication to be correct, it is necessary to unseal the ...
- Page 4 VacuumChambers.eu is not liable for damages, nor does it cover them under the warranty, for any kind of losses resulting from the breakdown of this product. In the case of a claim, VacuumChambers.eu's sole responsibility is to accept a return or exchange of the product itself.
Need help?
Do you have a question about the DVPGM033A and is the answer not in the manual?
Questions and answers