1. Manuals
  2. Brands
  3. MEN Mikro Elektronik Manuals
  4. PCI Card
  5. F602
  6. User manual

MEN Mikro Elektronik F602 User Manual

3u compact pci express side card
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
20F602-00 E2 – 2010-03-30
F602 – 3U CompactPCI®
Express Side Card
Configuration example
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the F602 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for MEN Mikro Elektronik F602

  • Page 1 20F602-00 E2 – 2010-03-30 F602 – 3U CompactPCI® Express Side Card Configuration example User Manual...
  • Page 2 CompactPCI® environment and as system-slot cards on a CompactPCI® Express backplane. The F602 supports 4 PCI Express® links with 1 lane each to the backplane via its XJ2 and XJ3 connectors. In a standard 8-slot hybrid backplane from Schroff® the CompactPCI®...
  • Page 3 - Transfer rates up to 150MB/s (depends on hard disk) - RAID level 0/1 support (depends on CPU board) Electrical Specifications • Supply voltage/power consumption: - +5V (-3%/+5%), tbd typ. (w/o hard disk) - +3.3V (-3%/+5%), tbd typ. (w/o hard disk) MEN Mikro Elektronik GmbH 20F602-00 E2 – 2010-03-30...
  • Page 4 • Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst) Software Support • Driver software can be found in the data sheet of the CPU board that you use. MEN Mikro Elektronik GmbH 20F602-00 E2 – 2010-03-30...
  • Page 5 Front Panel connector CPU Board Onboard Onboard connector SATA SA SA-Adapter R Rear connector USB 2.0 Front USB-to-UART USB 2.0 Panel Bridge Board-to- Board Connector SDVO CompactPCI Express PCI Express Backplane Links Connectors MEN Mikro Elektronik GmbH 20F602-00 E2 – 2010-03-30...
  • Page 6 • -40..+85°C Please note that some of these options may only be available for large volumes. Please ask our sales staff for more information. For available standard configurations see online data sheet. MEN Mikro Elektronik GmbH 20F602-00 E2 – 2010-03-30...
  • Page 7 • Store the board only in its original ESD-protected packaging. Retain the original packaging in case you need to return the board to MEN for repair. MEN Mikro Elektronik GmbH 20F602-00 E2 – 2010-03-30...
  • Page 8 "in" meaning "to the board or component", "out" meaning "coming from it". Vertical lines on the outer margin signal technical changes to the previous issue of the document. MEN Mikro Elektronik GmbH 20F602-00 E2 – 2010-03-30...
  • Page 9 MEN was negligent regarding the design or manufacture of the part. Unless agreed otherwise, the products of MEN Mikro Elektronik are not suited for use in nuclear reactors or for application in medical appliances used for therapeutical purposes.

  • Page 10: Table Of Contents

    DVI ..........38 3.2 Finding out the Board’s Article Number, Revision and Serial Number38 MEN Mikro Elektronik GmbH 20F602-00 E2 – 2010-03-30...
  • Page 11 Figure 2. Map of the board – top view....... . . 14 Figure 3. Labels giving the board’s article number, revision and serial number. 38 MEN Mikro Elektronik GmbH 20F602-00 E2 – 2010-03-30...
  • Page 12 Table 16. Pin assignment of CompactPCI Express connector XJ3 ... 37 Table 17. Pin assignment of CompactPCI Express connector XJ4 ... 37 MEN Mikro Elektronik GmbH 20F602-00 E2 – 2010-03-30...

  • Page 13: Getting Started

    Getting Started Getting Started This chapter gives an overview of the board and some hints for first installation in a system. Map of the Board Figure 1. Map of the board—front panel MEN Mikro Elektronik GmbH 20F602-00 E2 – 2010-03-30...
  • Page 14 Getting Started Figure 2. Map of the board – top view Standoff screw Hard-disk guide rail SA-Adapter On-board SATA port 2.5" hard disk drive Hard-disk guide rail CompactPCI Express Connectors MEN Mikro Elektronik GmbH 20F602-00 E2 – 2010-03-30...

  • Page 15: Configuring The Hardware

    The F602 is suited as a side card for different MEN CPU boards. If you are not sure if your CPU board is supported, please check the CPU’s data sheet. If the F602 can be used with your CPU, attach it to the CPU board as is described in the CPU board’s user manual.

  • Page 16: Functional Description

    CompactPCI Express backplane connector XP1. Board-to-Board Connector The F602 side card is attached to a CPU board using a board-to-board connector. This connector supports special I/O functions from the CPU. The board-to-board connector is located at the bottom side of the board, so that the F602 can be attached to the right side of a CPU board.

  • Page 17: Table 1. Pin Assignment Of The 114-Pin Board-To-Board Connector, Pins 1..38

    Functional Description Table 1. Pin assignment of the 114-pin board-to-board connector, pins 1..38 SATA_TX+ SATA_TX- SATA_RX+ SATA_RX- PCIE1_TX+ PCIE3_TX+ PCIE1_TX- PCIE3_TX- PCIE1_RX+ PCIE3_RX+ PCIE1_RX- PCIE3_RX- PCIE0_TX+ PCIE2_TX+ PCIE0_TX- PCIE2_TX- PCIE0_RX+ PCIE2_RX+ PCIE0_RX- PCIE2_RX- MEN Mikro Elektronik GmbH 20F602-00 E2 – 2010-03-30...

  • Page 18: Table 2. Pin Assignment Of The 114-Pin Board-To-Board Connector, Pins 39..76

    Functional Description Table 2. Pin assignment of the 114-pin board-to-board connector, pins 39..76 +3.3V +3.3V USB_2_3_OC# USB_D3- USB_D3+ USB_D2- PCIE_WAKE# USB_D2+ PLT_RST# LINKCAP SMB_CLK SMB_DATA SDVOCTRL_CLK SDVOCTRL_DATA PCIE_CLK_A_REF+ PCIE_CLK_A_REF- MEN Mikro Elektronik GmbH 20F602-00 E2 – 2010-03-30...

  • Page 19: Table 3. Pin Assignment Of 114-Pin Board-To-Board Connector, Pins 77..114

    Functional Description Table 3. Pin assignment of 114-pin board-to-board connector, pins 77..114 SDVOB_BLUE- SDVOB_BLUE+ SDVOB_GREEN- SDVOB_GREEN+ SDVOB_RED- SDVOB_RED+ SDVOB_CLK- SDVOB_CLK+ SDVOB_INT- SDVOB_INT+ MEN Mikro Elektronik GmbH 20F602-00 E2 – 2010-03-30...

  • Page 20: Table 4. Signal Mnemonics Of 114-Pin Board-To-Board Connector

    Differential pair of PCIe receive lines, port 3 PCIE3_RX- PCIE3_TX+, Differential pair of PCIe transmit lines, port 3 PCIE3_TX- PCIE_WAKE# Wake signal from PCIe device to wake F602 from sleep state USB_D[2]+, in/out Differential pair of USB lines, port 2 USB_D[2]-...
  • Page 21 LINKCAP indicates how the CompactPCI Express backplane system slot is routed (2- Link combined or 4-Link configuration). PLT_RST# Platform reset (global reset) SMB_CLK System management bus clock SMB_DATA in/out System management bus data MEN Mikro Elektronik GmbH 20F602-00 E2 – 2010-03-30...

  • Page 22: Dvi Connector

    Digital ground TX[0..2]+, TX[0..2]- out Transmit data lines (TMDS), differential pairs TXC+, TXC- TX clocks (TMDS clock), differential pair The DVI fuse used on F602 is a PolyFuse and therefore needs no maintenance MEN Mikro Elektronik GmbH 20F602-00 E2 – 2010-03-30...

  • Page 23: Usb Interface

    Table 7. Pin assignment of USB front-panel connector USB_D- USB_D+ Table 8. Signal mnemonics of USB front-panel connector Signal Direction Function +5 V power supply Digital ground USB_D+, USB_D- in/out USB lines, differential pair MEN Mikro Elektronik GmbH 20F602-00 E2 – 2010-03-30...

  • Page 24: Uart Interface

    Functional Description UART Interface The F602 provides one UART interface that is controlled using an USB port from the CPU board. Physical interfaces from RS232 to RS485—isolated or not—are implemented using an SA-Adapter via a 10-pin on-board connector. Data rates up to 1 Mbit/s are possible.

  • Page 25: Connection Via 10-Pin Sa-Adapter Connector

    Make sure that the adapter matches the standard dimensions for SA-Adapters. (See also installation hints in the adapter’s user manual.) If your F602 is already attached to a CPU board: Power down your system and remove the F602 from the system together with the attached CPU, and discon- nect the two boards as described in the CPU board’s user manual.
  • Page 26 Remove the front panel screws of the SA-Adapter. The SA-Adapter is plugged on the F602 with the component sides of the PCBs facing each other. Plug the SA-Adapter into the respective slot, and push it down carefully.
  • Page 27 Reinstall the front panel: Place the front panel back over the SA-Adapter con- nector. Put back and fasten the front-panel mounting screws removed before. Screw the SA-Adapter tightly to the F602 using the front-panel screws removed before and two pan-head screws of type M3x6 according to DIN85 with wash- ers.

  • Page 28: Serial Ata (Sata)

    Functional Description Serial ATA (SATA) The F602 supports one serial ATA (SATA) interface controlled by the CPU board. You can connect a 2.5" hard-disk drive directly on the board. The SATA interfaces support transfer rates up to 150 MB/s. Note: As an option a CompactFlash can be connected to the SATA interface via a CompactFlash adapter card instead of the hard disk (see Chapter 2.6.1.2...

  • Page 29: On-Board Hard-Disk Connector (Sata)

    • 7- & 15-pin SATA receptacle connector, 1.27mm pitch Table 12. Pin assignment of SATA connector for on-board hard disk SATA_TX+ SATA_TX- SATA_RX- SATA_RX+ Key and spacing, separate signal and power segments +3.3V +3.3V +3.3V MEN Mikro Elektronik GmbH 20F602-00 E2 – 2010-03-30...
  • Page 30 Perform the following steps to install a hard disk: If your F602 is already attached to a CPU board: Power down your system and remove the F602 from the system together with the attached CPU. It is not necessary to deinstall the F602 from the CPU board.
  • Page 31 Hard Disk port 2.5" hard disk drive Hard-disk guide rail CompactPCI Express Connectors Fasten the hard disk at the guide rails, using the four screws supplied with F602. Picture shows a similar board MEN Mikro Elektronik GmbH 20F602-00 E2 – 2010-03-30...
  • Page 32 Functional Description Reinstall the SATA connector. Make sure to match the pins correctly. Push the connector towards the hard disk until it sits firmly in its place. Picture shows a similar board MEN Mikro Elektronik GmbH 20F602-00 E2 – 2010-03-30...
  • Page 33 Installing CompactFlash Adapter Perform the following steps to install the adapter for the second CompactFlash: If your F602 is already attached to a CPU board: Power down your system and remove the F602 from the system together with the attached CPU.
  • Page 34 SA-Adapter port CompactPCI Express Connectors Fasten the adapter card to the F602 at the bottom side of F602 using the four screws supplied with the adapter. CompactPCI Express Connectors Insert a CompactFlash card into the CompactFlash holder on the adapter as indicated by the arrow on top of the card.

  • Page 35: Compactpci Express Interface

    (XJ2 and XJ3) provide the PCIe differential pairs for multiple PCIe buses to be routed from the board to the backplane. The top connector (XJ4) provides specialized I/O signals. The F602 provides four PCI Express links from the CPU board on the CompactPCI Express backplane connectors.

  • Page 36: Table 13. Pin Assignment Of The Two 3-Pin Power Supply Connectors Xp1 (Board Revisions

    Table 14. Pin assignment of 7-pin power supply connector XP1 (board revisions R00.03.xx and higher) 3.3V Signal connector XJ2 Table 15. Pin assignment of CompactPCI Express connector XJ2 PCIE3_ PCIE3_ PCIE3_ PCIE3_ MEN Mikro Elektronik GmbH 20F602-00 E2 – 2010-03-30...

  • Page 37: Table 16. Pin Assignment Of Compactpci Express Connector Xj3

    REF+ REF- REF+ REF- PCIE0_ PCIE0_ PCIE0_ PCIE0_ PCIE1_ PCIE1_ PCIE1_ PCIE1_ PCIE2_ PCIE2_ PCIE2_ PCIE2_ Signal connector XJ4 Table 17. Pin assignment of CompactPCI Express connector XJ4 PCIE_ GND 5Vaux WAKE# MEN Mikro Elektronik GmbH 20F602-00 E2 – 2010-03-30...

  • Page 38: Appendix

    Serial Number MEN user documentation may describe several different models and/or hardware revisions of the F602. You can find information on the article number, the board revision and the serial number on two labels attached to the board. • Article number: Gives the board’s family and model. This is also MEN’s order- ing number.

Table of Contents