Related Manuals for Xpand RF PRO AE125-RF
Summary of Contents for Xpand RF PRO AE125-RF
- Page 1 XPAND RF PRO EMITTER SYSTEM AE125-RF User Guide to be used on dark background to be used on light background...
- Page 3 XPAND RF PRO Emitter Sys XPAND 3D RF emitter system generates the signal that synchronizes XPAND 3D RF glasses with digital projector. The system consists of: » 1x RF PRO Emitter (AE125-RF) » 1x 3D-VESA to BNC sync cable (CAB-01-0301) »...
-
Page 4: Installation
3. Use included sync cable to connect your projector’s 3D-VESA (MINI-DIN-3 female) sync output connector to RF PRO’s sync connector . If your projector has a different 3D sync output connector please consult with our XPAND technical support team. Positioning and Mounting »... -
Page 5: User Interface
» Make sure that your 3D glasses have been successfully paired with the emitter and that they are turned ON. Refer to your 3D glasses’ manual for instructions on how to pair them with new emitter. © XPAND, All Rights Reserved. www.xpandvision.com... -
Page 6: Technical Specifications
Operating Temperature: 5 °C – 40 °C / 41 °F – 104 °F Dimensions and weight: 115 × 76 × 36 mm, 126 g / 4.5 × 3 × 1.4 in, 4.4 oz © XPAND, All Rights Reserved. www.xpandvision.com... -
Page 7: Important Safety Instructions
Important Safety Instructions » Read these instructions. » Keep these instructions. » Heed all warnings. » Follow all instructions. » Do not use this apparatus near water. » Clean only with dry cloth. » Only use the attachments/accessories specified by the manufacturer. to be used on dark background to be used on light background... - Page 8 AE125-RF_M_eng_01...