CAUTION
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Installing cartridge group
Measure and note the axial clearance (A) (see the section on axial
clearance).
Clearances out of tolerance
Clearances out of tolerance and excessively worn components can be
the cause of serious damage to machinery and property.
Have components assessed and, if necessary, replaced by an ABB
Turbocharging Service Station.
Connect oil lines and all air lines in accordance with engine builder's
instructions.
Version with compressor wheel cooling system
Fit the air supply line. (Also see the chapter Preliminary remarks /
Layout and functioning.)
Fit the filter silencer or air suction branch.
Fit the insulation.
Operation Manual / TPL65VA32/33
8
8.9
Page 103