QWNET BT820 User Manual

BT820 USER MANUAL
71.00 mm
BT820
Stereo
Bluetooth Headphones
BT820
User Manual
, :
1.
2.
Thanks for using BT820 Bluetooth headphone

Repeated pairing

For Bluetooth headphone with Mobile phone:
,
Before using stereo Bluetooth headset, please check bellow s points firstly.
If the mobile phone and the headphone had connected before, then press
1. Make sure the built-in battery is fully charged.
the headphone 's multifunction button
connecting automatically, the LED indicator light blue flashes per every
For headphone charging:
0.5 seconds. If headphone searched the mobile phone successfully, it will
Use the USB cable to connect the computer, When
be connected automatically.
charging, the power light in headphone is red, (DC 5V for charging).
Connecting with the other devices if under the
This device is not attached adapter sales together
connect status:

Turn on Bluetooth headphone:

The Bluetooth headphone is in connecting at a Bluetooth device. If the user
Please press the headphone 's multifunction key for 3 seconds, wants to change connecting to other Bluetooth devices press the
hear "beep" sounds, which means headphone turns on, at the same time, headphone's multifunction key
the blue light flashes.
sounds , the LED indicator turns flashing in red and blue colour, then you
can connect to other Bluetooth devices.

Turn off Bluetooth headphone:

Use Bluetooth headphone for phone call:

Under the working status, press the headphone's multifunction key
1. Answer the call / rejecting calls
for about 4 seconds, the indicator light flashes continuously. The headphone
When there is an incoming call, you can hear the mobile phone's phone
will be turned off.
(Note: if you don't use the Bluetooth headphone, please turn off). call sounds signal through the Bluetooth headphone, press the
headphone's multifunction key
phone key to answer the call, if you want to reject the call, press the

Bluetooth headphone and mobilephone's pairing:

headphone's multifunction key
First time pairing with mobile phone, please check if Bluetooth function in reject the call.
mobile phone is turned on.
2. End the call
Please put Bluetooth headphone and mobile phone in the place where it is During a call, to end the call, press the headphone's multifunction
,
easy to see, the distance is 1 meter s range. key, or use a mobile phone to terminate the call as usual.
3. Phone numbers re-dial

New pairing

In the standby mode, double click the headphone's multifunction
key to re-dial last phone number as phone calling.
For Bluetooth headphone with Mobile phone:
1. Press the headphone 's multifunction key for about 6 seconds, till

Music status

the Bluetooth headphone to hear "beep" 2-times sound , red and blue light
flashing alternately, means on the pairing status. 1. Play / pause for music
When bluetooth for headphones and mobilephone's connection well, and
2. Open your mobile phone Bluetooth function, search the Bluetooth
headphone's model code "BT820", the Bluetooth headphone and mobile user begins to play music, press key
phones will start automatically pairing, if connected successfully, then the press again, for re-play.
LED light indicator turns blue, and flash every 4 seconds.
2. Pre / Next song playing.
(Some old mobile phone requires input matching password when pairing, the
Press key
headphone's password is "0000".)

Volume control:

1. Increase the volume
During a call, or when the music is playing, press the headphone's key
for 3 seconds, it will be the volume increases, when the volume to the maximum, the Bluetooth
headphone will have a beep sound to remind.
2. Reduce the volume
During a call, or when the music is playing, press the headphone's key
the volume decreases, when the volume to the minimum, the Bluetooth
headphone will have a beep sound to remind.

External audio input

When plug in 3.5MM audio cable, then the Bluetooth function will be
for about 2 seconds, hear "beep"
disconnected automatically, the headphone will play 3.5MM signal.

Operation Instruction

to answer the call, or use mobile
for about 2 seconds, you can
short time for pause and
Parts List
Bluetooth Headphone
3.5 to 3.5 jack cable
for Pre. song and key for next song.
Micro USB cable
User Manual
,
,

Indicator light

Power on/off/Play/Pause/Phone
Next/Volume+
Previous/Volume-
Micro USB Charge
AUX in
1PCS
1PCS
1PCS
1PCS