Ortus Keypad-R Operation Manual

Wireless keypad

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Attention! Reliability and life of the product are provided not only by the quality of product itself,

but also by the compliance with operating modes and conditions, therefore, this document

requirements is mandatory

ORTUS Group

Keypad-R

Wireless keypad

Keypad-R

Operation manual

Product Compatibility Table

Compatible radio receiver

Configuration Software

Central Monitoring Station

Version en_2

Version

Lun-R

Version

Configurator 11

Version

Orlan

Table of Contents

Need help?

Do you have a question about the Keypad-R and is the answer not in the manual?

Questions and answers

Summary of Contents for Ortus Keypad-R

Page 1 Attention! Reliability and life of the product are provided not only by the quality of product itself, but also by the compliance with operating modes and conditions, therefore, this document requirements is mandatory Wireless keypad Keypad-R Operation manual Product Compatibility Table Version...
Page 2 4. How to use..................................4 4.1. LED Indication............................... 5 4.2. Group Arming/Disarming........................... 5 4.3. Binding..................................5 4.4. Wireless signal strength............................. 6 4.5. Installing................................. 6 5. Maintenance..................................6 6. Operating conditions..............................6 7. Storage....................................7 8. Transportation................................7 9. Disposal.................................... 7 Keypad-R Version en_2...
Page 3 1. Purpose The Keypad-R (hereinafter referred to as the “keypad”) is designed to enter the arming/dis- arming codes and transmit them to the Lun-R receiver that is connected to the Lun control panel (more about for compatibility, see the documentation of the relevant control panel).
Page 4 A multi-color LED indicator and RESET contacts to initiate the process of binding with the Lun-R radio are placed on the keypad PCB. Figure 1. Keypad-R Depending on external actions, the keypad transmits the following events to the Lun-R re- ceiver: ●...
Page 5 6. Binding will processed automatically and, if successful, ends by turning on the red LED for 2…3 seconds (signal "Bound"). The keypad waits 70 seconds for binding. To reinitialize the binding process, briefly close the RESET contacts again. Keypad-R Version en_2...
Page 6 2. Keypad shall be used at the temperature of –20°С to +55°С and relative humidity of 5% to 85%. 3. If the transportation conditions differ from the operating conditions, then the keypad must be kept in the operating conditions for 2…6 hours before switching on. Keypad-R Version en_2...
Page 7 3. Transportation temperature shall be of –50°C to +50°C at the relative humidity of 5% up to 98%. 9. Disposal Keypad disposal shall be carried out according to electronic household appliance disposal rules established by the legislation of the State, where the product is operated. Keypad-R Version en_2...
Page 8 Manufacturer: ORTUS Group 1 East Liberty, 6th Floor Reno, NV 89501, USA Tel.:+1 650 240 27 62 mail: info@ortus.io http://www.ortus.io Keypad-R Version en_2...