Summary of Contents for CLEAR DESIGN BHALGSA
- Page 1 BHALGSA BOOST L-SHAPE HEIGHT-ADJUSTABLE WORKSTATION A1 | A2 | A3 Includes Add-Ons: General Installation Guide...
- Page 3 EDITION CODE BHALGSA :: Workstation ............1 ADD-ONS :: Modesty Panel ..............7 :: Slim Pedestal ..............11 :: Cable Tray ..............15...
-
Page 4: Workstation Overview
WORKSTATION OVERVIEW BOOST L-Shape Height-Adjustable Workstation All parts listed are for a single workstation; additional parts will be needed for additional workstations. PARTS LIST CODE DESCRIPTION ###### Surface BASB72 Support Bar BFB1 Flat Bracket... - Page 5 Inner-Adjustable Beam Feet (Set of 2) 23" Arm Bracket Center Post Brackets (L, REAR, & R) Center Post Base Leg with Motor Handset BHALGSA Glides Extension Cords (SHRT, MED, & LG) Power Cable Screw (A) Screw (B) Screw (C) Screw (D)
- Page 6 1 | ASSEMBLE LEG POST SEPARATELY Attach center leg with motor to the center post brackets using screws (A). Then, attach side legs with motor and arm brackets to left and right adjustable beams. Note: Replace the default arm brackets if workstation requires BHA19 or T-brackets.
- Page 7 2 | ATTACH WORKSTATION FRAME Join all three legs by attaching the inner adjustable beams to the left and right adjustable beams and center post brackets. Keep locking screws (B) loose on the inner adjustable beams to accommodate surface size in step 3. Inner Adjustable Beam...
- Page 8 3 | PLACE FRAME ON SURFACE Secure flat plate, flat bracket(s), and support bars to the surfaces using screws (F). Extend beam to fit table size accordingly. Secure locking screws on the adjustable beam and attach to surface using screws (F). Note: If using surface-mounted dividers, keep the frame 1.5 inches inset from the surface edge.
- Page 9 4 | INSTALL FEET, GLIDERS, AND CONTROL BOX , THEN SECURE POWER. Install feet using screws (D) for outside legs. Install center post base to center leg using screws (E). Mount control box to the adjustable beam using screw (G). Then, secure power cord to the control box. Mount handset using wood screws (C) and attach to control box.
- Page 10 A2: MODESTY PANEL OVERVIEW BOOST L-Shape Height-Adjustable Workstation All parts listed are for a single modesty panel; additional parts will be needed for additional modesty panels.
- Page 11 PARTS LIST CODE DESCRIPTION Laminate Modesty Panel* GLMP## Machine Screws L-Brackets BMPBFB Wood Screws* *NOTE: For Steel Modesty Panel: components may vary, but process is similar.
- Page 12 1 | SECURE BRACKETS TO MODESTY PANEL Connect the BMPBFB bracket to the modesty panel using screws. Secure tightly. NOTE: If modesty panel does not have pre-drilled holes, use wood screws instead of machine screws.
- Page 13 2 | ATTACH MODESTY PANEL TO SURFACE Attach modesty panel to surface using wood screws provided with brackets. Panel will be center aligned and flushed with back of surface.
- Page 14 A3: SLIM PEDESTAL OVERVIEW BOOST L-Shape Height-Adjustable Workstation All parts listed are for a single slim pedestal; additional parts will be needed for additional slim pedestals.
- Page 15 PARTS LIST CODE DESCRIPTION Large Mounting Bracket BFSLM.SM Small Mounting Bracket BFSLM Slim Pedestal Machine Screw BFSLM.HW Wood Screw...
- Page 16 1 | SECURE BRACKETS TO SLIM PEDESTAL Align large mounting bracket to front of pedestal and align small mounting bracket to back. Secure both brackets using provided screws.
- Page 17 2 | ATTACH SLIM PEDESTAL TO SURFACE Secure pedestal to surface using wood screws. The pedestal brackets will connect on either side of the center beam.
- Page 18 A4: CABLE TRAY OVERVIEW BOOST L-Shape Height-Adjustable Workstation All parts listed are for a single cable tray; additional parts will be needed for additional cable trays.
- Page 19 PARTS LIST CODE DESCRIPTION Surface-Mount Cable Management Tray BHCT Wood Screws...
- Page 20 1 | EXTEND CABLE TRAY TO DESIRED LENGTH Extension range: 25"–45".
- Page 21 2 | ATTACH CABLE TRAY TO SURFACE Attach cable tray using wood screws.
- Page 22 1-866-304-7197 | inspire@mycleardesign.com | mycleardesign.com © 2022 Clear Design | Version 22.1.3...
Need help?
Do you have a question about the BHALGSA and is the answer not in the manual?
Questions and answers