Hionec Clear User Manual

Hionec Clear
User Manual
Remove the film label on the hearing aid and charge the
devices correctly before use.
Technical Specification
Max.OSPL90 ≤115+3dB
HF Avg.OSPL90
Max gain
HFA Gain
EQ Input Noise
Frequency Range
300-3500Hz
Total Distort
Power On/Off
Note: Remove the film label from the hearing aid
before using.
• Power On:
Take the hearing aid out of the charging case.
• Power Off:
Put the hearing aid into the charging case.
Distinguish between left (blue) and right (red) hearing aid.
Left
Hionec Clear Overview
5. Charging
contacts
6. Magnet
How to Replace Ear Tip
Hearing aids come with M-size ear tips. If the ear
tip does not fit in your ear canal, it will be difficult
104±4dB
to hear, or you may hear a whistling sound. Replace
the ear tip with the supplied S size or L size.
30±3dB
28±3dB
≤32dB
1) Turn the ear
≤3%
tip over.
2) Hold the hearing
aid and pull off the
ear tip.
3) Hold the
hearing aid with
one hand.
4) Insert a
suitable-size ear
tip gently into the
sound tube.
5) Pull the ear tip
gently to make
sure it is secure.
Right
1. Volume control
2. Microphone
Charging case
3. Ear tip
4. Speaker
Charging cable
How to Wear Hearing Aid
1) Place the hearing aid into the ear
canal comfortably.
2) Rotate the hearing aid to fit it into your
ear and make sure it is secure.
How to Adjust Volume
Adjust the volume of the hearing aid with the knob.
Turn clockwise to increase
the volume.
Turn counterclockwise to
decrease the volume.
Accessories
L M S L M S
Ear tips x6
x2
Cleaning tool Earwax filter
1
2