Summary of Contents for Prosonic PRO-698
- Page 1 User Manual PRO-698 Fingerprint Time Attendence and Access Control PRO-698 Fingerprint Time Attendance and Access Control...
-
Page 2: Notice For Use
Access Control Instruction Manual Access Control Manual 1. Notice for use 1.1 Access Control wiring diagram Access Control External Power wiring diagram（recommendation） General Power wiring diagram：... - Page 3 Access Control Instruction Manual (Note: Use ordinary power wiring need to be in parallel with a diode in both ends of the lock, Prevent released Back-EMF by electromagnetic to burnout the access control system.) 2 Installation Equipment 2.1 Device Install Step 2.1.1 Recommended installation height is 1.2m from the ground to the camera(Suitable for height of user: 1.5m-1.8m), kindly adjust by height of user;...
- Page 4 Access Control Instruction Manual Figure 3 Figure 4 Figure 5 Figure 2 Figure 1 Figure 6 3 Description of device “ ”Click the button to enter the number; “ ”Click the button to enter the main menu; “ ”Click the button to enter the quick search operation; “...
- Page 5 Access Control Instruction Manual Step 1: Install the device and power on the device; Step 2: User Registration, Fingerprint Registration, ID / IC Card, Password, Assignment Rights; Step 3: user authentication, confirm the registration fingerprint, ID / IC card, the password is available; Step 4: View records, through the access control software to download the original records of equipment for data analysis.
- Page 6 Access Control Instruction Manual 3.3 Verification Mode In the initial interface, Users through the fingerprint, ID/IC card, password authentication identity, After the verification is successful, the original record will be saved on the device, Voice prompt "OK!", Then return to the initial interface. 4.
- Page 7 Access Control Instruction Manual 4.3 Download Data Download user data back up to Pen drive, Prevent loss the data , and to facilitate data upload in future. 4.4 Upload Data Uploaded data to more than device via Pen drive, avoid double entry operation. 5.
- Page 8 Access Control Instruction Manual 6.2 Rec. Rule Click “Rec. Rule” in Settings menu, set available log alert and punch interval. 6.2.1 Available log alert: When the available capacity of only the capacity you set, the device will be prompted 6.2.2 Punch interval (min): In the set time, repeated punching no logs generated.
- Page 9 Access Control Instruction Manual 6.4 LockCtrl Click “LockCtrl” in Settings menu, Enter the access control function. 6.4.1 Time Setting "Time" refers to setting the time zone to allow open the door, It is an important part of access control settings. And up to 255 “time” can be defined. it can be set to 6 time periods each "time", Each time zone refers to the valid time period within 24 hours, 6 time zones are "or"...
- Page 10 Access Control Instruction Manual 6.4.4 Lock Type Set There are three types of Lock Type Set: NO, Open, Close; "NO" means not using the door sensor; "Close" means the door magnetic is close status, If the door is open status, an alarm occurs; "Open" means the door magnet is open status, If the door is closed more than the set time, an alarm occurs, the default is NO.
- Page 11 Access Control Instruction Manual 7.2 Reg.Info View user registration, admin registration, fingerprints registration, ID / IC card registration, password registration, attendance logs and other information. 7.3 Dev.Info Information such as manufacturer, date of manufacture and firmware version is displayed.
Need help?
Do you have a question about the PRO-698 and is the answer not in the manual?
Questions and answers