Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for LAOPAO HA-32

  • Page 3 Composition of Product Structure 1 .Product name: In The Ear Hearing Aid 2.Model: HA-32 3.Application: Hearing-impaired people 4.Working principle: A microphone converts sound signals into electrical signals. The electrical signals are then processed and amplified by the chip and then sent to the receiver. The receiver converts the amplified electrical signals into sound signals and is then...
  • Page 4: Power On & Power Off

    Operation Instructions Power on & Power off Volume control Press for more Double-click the than 3 seconds volume control Power on Power off Volume 1 Volume 2 Volume 3 Tips tone Four beeps Four beeps One beep Two beeps Three beeps Note: This hearing aid has three levels of volume.
  • Page 5 Hearing Aid Breakdown Self Check Problem Cause Solution description No power Charging No sound Microphone jammed Clean the microphone Low power Charging Sound fuzzy The volume is too low Turn up the volume Earplugs loose Wear earplugs well again Didn't wear it properly Wear a hearing aid tightly Hearing aids scream...
  • Page 6 Charging Status and Usage Upper cover Button Hearing aid charging ping Hearing aid charging slot Hearing Aid Charging Status Hearing aid Charging box indicator light indicator light Charging Red light is on Fully charged...
  • Page 7 Charging Box Charging Status Charging box indicator light Charging Red light is flashing Fully charged Red light is on Note: 5 seconds after the charging line is unplugged,the red light will turn off. Charge Box Breakdown Self Check Problem Cause Solution description The power LED does...
  • Page 8: Performance Parameter

    Performance Parameter HA-32 ≤112dB+3dB Max-OSPL 30dB±5dB HFA-FOG ≤3% Total Harmonic Distort 200Hz~5000Hz Frequency response ≤20dB EQ Input Noise ≤2.0mA Battery current drain Description: The above parameter index detection equipment is FONIX8000Hearing Aid Test System. The standard IEC60118-7 2005 was tested, and the 2CC coupling cavity HA-1 was used.
  • Page 9: General Safety Specifications

    General Safety Specifications High temperatures, high humidity, strong magnetic fields (>0.1T magnetic resonance), X gray, and other mechanical stresses may damage the hearing aid. Shock protection classification: Type B for internal power supply. Don’t place the hearing aid in an area of high temperatures and/or humidity. Do not use the hearing aid when bathing, washing, shaving, or applying makeup.
  • Page 10: Electromagnetic Compatibility

    Electromagnetic Compatibility Hearing aids comply with GB/T 25102.13 standard electromagnetic compatibility requirements The field intensity of the rf test signal when the hearing aid conforms to the hearing aid immunity specified in GB/T 25102.13-2010 Neighbor compatibility. When in the following field intensity 0.08~0.8 0.8~0.96 0.96~1.4...
  • Page 11: Maintenance

    Maintenance Your hearing aid is a high-precision system. Proper maintenance and operation ensures optimum performance. Clean the earwax in the ear canal at least twice a week. Clean the microphone hold and receiver hold regularly. If the hearing aid is damp, do not use a microwave oven, hairdryer, and/or other electric heaters to dry.
  • Page 12 Repair When the hearing aid is out of order, please refer to the methods described in the “(Hearing aid/Charge Box)Breakdown Self Check” table in this manual. If you still cannot solve the problem in accordance with these methods, send the whole set of hearing aids back to the company for repair. Please describe the hearing aid malfunction in as much detail as possible.
  • Page 13 Transport Conditions and Storage Methods 1.Normal working conditions: a)Ambient temperature is recommended: 0℃~40℃ b)Relative humidity: ≤80% c)Barometric pressure: 86Kpa~106Kpa d)Working voltage: 5V 2.Transport The packed hearing aid can be transported by means of general cargo transport, but should avoid any explosion-sun,rain,snow and mechanical collision. 3.Storage For long-term storage, hearing aids should be stored at 0~38℃.Relative humidity should not be more than 80%.
  • Page 14: Symbol Description

    Symbol Description Description of the symbols in the label: Waterproof: hearing aids are sensitive electronic devices. Please pay attention to waterproof and moisture-proof. Classification of types of protection against electric shock: type B. Note! Consult random files. Accessories list Charging box: 1 PCS Ear plugs: Large、...

Table of Contents