Advertisement
Advertisement
Table of Contents
Related Manuals for High Zone BT86
Summary of Contents for High Zone BT86
- Page 1 Bluetooth Headphone BT86 User Manual ...
- Page 2 SPECIFICATIONS Bluetooth version: Bluetooth V3.0+EDR Support: HFPV1.5, A2DPV1.2, AVRCPV1.4, HSP1.2, GAVDP1.2, IOP SNR: 96dB SNR stereo ADC and stereo DAC Sensitivity: -80dBm<0.1%BER Transmission distance: 10m Frequency: 2.402 -2.480GHZ Transmission power: CLASS2, 4dbm Audio SNR: ≥75dB Audio performance: SBC decoding Battery capacity: 3.7V/300mAH L Charging voltage: DC5V Charging time: about 1 hour Working currency: ≤40mA Standby currency: <500uA Working temperature: -40ºC to +85ºC Play time: about 7 hours Working time: about 8 hours Standby time: about 400 hours ...
- Page 3 OPERATION GUIDE Power On: Long press for 2 seconds, voice prompt Power On”. Power Off：Long press for 2 seconds, voice prompt “Power Off”. Answer/Hang up Calls: Single press Re-dial Last Phone Call: Double press Play/ Pause Music: Single press Volume +/-: Long press Previous/Next Song: Single press Aux-in: The headset will switch to wired mode automatically once insert the audio cable to the Aux-in port and audio device, no need power. PARING 1. Initial Pairing: Bluetooth headset will enter pairing mode automatically, voice prompts“Pairing”. Turn on Bluetooth function on device and select BT86, no PIN code needed. Voice prompts “connected” when pairing successfully. 2. Re-Pairing: Long press for about 2 seconds in power off mode, headset enter pairing mode when red and blue LED indicator lights flash quickly. 3. Bluetooth headset will pairing connected device automatically when power on. LED INDICATOR LIGHT ...
- Page 4 1. Charging: Red light keeps on in charging mode, blue light on when fully charged. 2. Power on: Blue light flash for 1 time. 3. Pairing mode: Red and blue lights flashing alternately. 4. Paired mode: Blue light flash every 1.5 seconds. 5. Standby mode: Blue light flash every 1.5 seconds. 6. Play mode: Blue light flash every 1.5 seconds. 7. Power off: Red light keeps on for 3 seconds. ATTENTION 1. The port at the button of headset is for audio input only, please DO NOT connect other headphones. 2. Please charge the Bluetooth headset when voice prompts “Battery Low”. 3. To prevent possible hearing damage, do not listen at high volume levels for long periods. ...
- Page 5 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the BT86 and is the answer not in the manual?
Questions and answers