Basic Tuning - Rexton BiCore C R-Li Quick Manual

Soundpro 2.0
Customizing Soundpro 2.0
Soundpro Mode
The default setting, Balanced Focus, should
be maintained during First Fit. If changes are
required during follow up visits, proceed as
follows:
1. To shift the focus toward environmental
sounds, move the slider to the left. You have
3 steps available.
This classification will more often choose
microphone modes with less directionality.
This is more beneficial for people that
require full processing support only in very
demanding situations.
2. To increase the focus on speech components,
move the slider to the right. You have 3 steps
available.
This classification will more often choose
microphone modes with more directionality
and stronger noise reduction.
This is more beneficial for people that face
challenges understanding speech even at
low noise levels.
Manual Offsets
Changing these offsets will affect all acoustic
environments where that component is present.
(i.e. Noise as part of Speech in Noise or Noise as
part of Background Noise, etc.).
3. Select the component to change
4. Select a number of handles
5. Click on the up or down arrows as needed
These changes are made in 1 dB steps
Manual Offsets - Bluetooth
You may adjust the audio streaming response
for Bluetooth phone and TV streaming
independently. The changes will carry over to
the Audio Streaming in tab under Fine Tuning
also.
4
1 2
3
4
5

Basic Tuning

Basic Tuning
Use the Basic Tuning tab to make
adjustments for gain, loudness and comfort
issues after First Fit.
• Master Gain adjusts overall gain for all
frequencies and input levels.
Note: the number indicates an average of
gain across all channels
• Soft Sounds adjusts the 50 dB curve
• Medium Sounds adjusts the 65 dB curve
• Loud Sounds adjusts the 80 dB curve
• Speech increases / decreases gain for
speech intelligibility
• Too Sharp increases low and mid and
decreases high frequencies.
• Too Muffled decreases low and mid and
increases high frequencies
5