Download Print this page

Art Lighting Production ALWL10 Quick Start Manual

Archer adjustable sconce

Advertisement

Quick Links

Archer Adjustable Sconce
Uses : E26 Medium Base 60 watt bulb or equivalent
Cord Length : 6' with plug and switch.
Before returning to your retailer, call our customer service line
at 1- 855-855-0294 W Appliance Co.,1356 Broadway
USAGE ADVICE
Two shades included for this item,
Smaller shade is ideal for bedside
lighting, workspaces and desks.
Larger shade is perfect for larger
spaces such living rooms and family
rooms.
IMPORTANT:
Please read, understand, and comply with all the instructions provided in this manual before using this product. Failure to comply with the instructions
set forth in this manual and/or using the product in ways other than the ways mentioned in this manual may result in serious injury and/or damage to
the product.
WARNING
DO NOT attempt to repair, disassemble, or modify the product under any circumstances.
DO NOT place the product near any heat source or in direct sunlight.
DO NOT use the lamp if the electrical power cord is damaged.
DO NOT touch any electrical appliances with wet hands.
DO NOT operate the lamp in damp or moist enviroments.
Never overload electrical circuits as it may cause electrical shock or hazardous fire.
CAUTION
Clean only with a soft dry cloth. Do not use any solvents or cleaning
solutions when cleaning the lamp.
Keep the light and power cord dry and clean at all times.
Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with package contents
list and diagram on above. If any part is missing or damaged, do not attempt to assemble, install or operate the product.
Contact customer service for replacement parts.
Tools Required for Assembly( not included): Screwdriver, Phillips Screwdriver, Safety Glasses, Ladder.
New York, NY 10018
Note:Hardware shown is not actual size.
Fixture
X 1
Shade L X 1
Shade Top
Iron Ring L X 1
Shade Bottom
Iron Ring L X 1.
Place on a flat and secure surface.
Only use the supplied AC power adapter to operate the lamp.
Model:ALWL10
Decorative Threaded
Mounting Plate
Knob X2
X 1
(attached to Mounting Plate)
Plastic Anchors
Shade S X 1
X4
Shade Top
Tapping Screw
Iron Ring S X 1
X4
Shade Bottom
Iron Ring S X 1.

Advertisement

loading
Need help?

Need help?

Do you have a question about the ALWL10 and is the answer not in the manual?

Questions and answers

Summary of Contents for Art Lighting Production ALWL10

  • Page 1 Cord Length : 6’ with plug and switch. Before returning to your retailer, call our customer service line at 1- 855-855-0294 W Appliance Co.,1356 Broadway New York, NY 10018 Model:ALWL10 Note:Hardware shown is not actual size. Decorative Threaded Fixture Mounting Plate...
  • Page 2 ASSEMBLY INSTRUCTIONS 3. Using the appropriate sized Iron Rings & 2. Line up the two screws on the Mounting Shade; line up the Bottom & Top Iron Ring Plate with the holes of the Fxture and with the adhesive tape on the Lampshade. 1.