JLF SUNRAD RAINBOW Instructions

JLF SUNRAD RAINBOW Instructions

Carbon infrared heater

Advertisement

Quick Links

INSTRUCTIONS FOR CARBON INFRARED HEATER
MODEL NO.: SUNRAD RAINBOW ASSEMBLE & OPERATION INSTRUCTION
Please read carefully and Save this instruction
WARNING
THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE.
We cannot be liable for any damages caused by failure to observe these instructions.

IMPORTANT SAFETY INSTRUCTIONS

READ CAREFULLY - The infrared heater is designed for safe operation. Nevertheless, installation, maintenance and operation of the heater
can be dangerous. Observing the following procedures will reduce the risk of fire, electric shock, injury to persons and keep installation time
to a minimum. Save these instructions for future used.
1. Read all instruction before using this heater.
2. Remove the unit from its packaging and check to make sure it is in good condition before using.
3. Do not let children play with parts of package (such as plastic bags).
4. Check the household voltage to ensure it matches the heater's rated specification. with a soft cloth moistened with mentholated spirit
or alcohol.
5. Check the power cord and plug carefully before used, to make sure that they are not damaged.
6. Before unplugging the power cord, be sure to turn off the power, when energizing the unit, be sure your hands are dry to prevent from
electric shock.
7. Do not use flammable objects near or point the heater like furniture, pillows. bedding, paper, clothes and curtains at least 3 feet (1meter)
from the front of the heater and keep them always the sides and rear.
8. Do not use near or in the immediate vicinity of a bath or swimming pool or any source of liquid.
9. To protect against electric shock, do not immerse cord or plug in water or any other liquid.
10. Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire or damage to
the heater.
11. Always unplug the heater when not in use.
12. Do not allow cord to overhang the counter top where it can be easily pulled by children.
13. Do not put fingers or foreign objects into the grill while in operation.
Adres:
Perenmarkt 10c
1681 PG Zwaagdijk-Oost
Tel.
+31(0)85 - 9020287
Mail:
info@jlfproducts.nl
Internet:
www.jlfproducts.nl

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SUNRAD RAINBOW and is the answer not in the manual?

Questions and answers

Summary of Contents for JLF SUNRAD RAINBOW

  • Page 1 Internet: www.jlfproducts.nl INSTRUCTIONS FOR CARBON INFRARED HEATER MODEL NO.: SUNRAD RAINBOW ASSEMBLE & OPERATION INSTRUCTION Please read carefully and Save this instruction WARNING THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE. We cannot be liable for any damages caused by failure to observe these instructions.
  • Page 2 22. This product contains recyclable materials. Do not dispose this product as unsorted municipal waste. Please contact your local municipality for the nearest collection point. INTRODUCTION The SUNRAD RAINBOW carbon infrared heaters produce instant and comfortable heat like the sun. These robust and weatherproof heaters are designed for domestic and commercial heating applications within indoor and outdoor areas. MODEL...
  • Page 3 20. Fasten the brackets securely to the mounting surface and the backside of the heater using the nuts and screws supplied. 21. Fasten the heater securely on the brackets using the nuts and bolts supplied. 22. The brackets can be used to adjust the direction of the heater, adjust the heater angle by loosening the two bolts on the wall mounting bracket, tighten the bolts again when the desired angle is reached.
  • Page 4 INSTALLATION WITH STAND Noted: The heater with tip over function, with 45 C angle, once heater over the angle, the heater will be automatically stop working. REMOTE CONTROL INSTRUCTIONS REMOTE CONTROL FUNCTIONS & HEATER LED RESPONSE Function Heater Button Function (Heater Power ON) (Heater Power OFF) LED Display Turn Heater OFF...
  • Page 5 NOTED: All SUNRAD RAINBOW heaters and their remote controls have the same frequency, so it is possible to control several heaters with just one remote. INSERTING BATTERIES Insert 2 AAA/ Alkaline type batteries into your remote control 1. Flip the backside of your remote control and pull out battery cover. Insert the batteries in accordance with the instructions and polarity the batteries.

Table of Contents