4-Step Folding For Easy Travel; Battery & Charging - ZENROLL C1 User Manual

5
4
After inflating the tires to proper pressure if necessary, your e-bike is a completely
functional bicycle. Check all tightening points to make sure.
Take a short ride. Adjust the height of the handlebar, and the height and the tilt of
the seat, if necessary, for maximum comfort.

4-STEP FOLDING FOR EASY TRAVEL

1. Fold the handlebar stem to the right side.
2. Unlock the seat post latch and slide down the saddle.
3. Push the pedals to the crank direction and turn to its folded position.
4. Unlock the frame latch and fold the bike in half.
BATTERY & CHARGING
The battery is located inside of the front half of the folding frame. The battery
comes with a set of keys that are used to turn it on/off as well as keep it unlocked/
locked to the frame. Each battery has a unique set of keys.
You should plug your battery in when you first receive it to ensure it is fully
charged prior to your first ride. The light on the charger will be RED when the
battery is charging and will turn GREEN when charging has finished.
Charging the battery ON the bike
1. Find the charge port at the bottom of the down tube.
2. Pull out the port cover and insert the charger output plug into the port.
3. Connect the input plug to the power supply.
Charging the battery OFF the bike
1. Insert the key into the lock on the underbelly of the frame.
2. Push the key in firmly and turn counterclockwise to unlock.
3. Remove the key and slide the battery out of the frame until it is free.
4. Insert the charger output plug into the charger port.
5. Connect the input plug to the power supply.
NOTICE Keep at least one key of the battery as a back-up. If you lose both keys,
you will be unable to remove the battery from the e-bike.
- 6 -