Summary of Contents for Schenley SLFCWD064
- Page 1 S i m p l e , N o b l e . S c h en le y Wet D r y Va c u u m Cl ea n er User Manual...
-
Page 2: Table Of Contents
Congratulations on your purchase and welcome to the Schenley family. Thank you for choosing Schenley Wet Dry Vacuum Cleaner. At Schenley we strive to bring the best home Cover Page cleaning experience through our products and services. The Schenley wet dry vacuum cleaner is a remarkable Introduction solution for deep floor cleaning. -
Page 3: Safety Warnings
• Remove the adapter/plug from the power socket your Schenley wet dry vacuum cleaner. If you give this product to before cleaning and maintaining the adapter or the others, please remember to give them these instructions as well. -
Page 4: Features And Attachments
The images in this User Manual are for illustrative purposes only. The actual product may differ. We recommend replacing your roller brush and HEPA filer every 2-3 months to avoid odor or contamination. You may purchase replacement parts and other accessories through Schenley. - Page 5 Features and Attachments Features and Attachments 2. SCHENLEY WET DRY VACUUM CLEANER 3. CHARGING BASE On/Off Button Mode Switch Button Charging Contact Plate Water Spray Button Charging Port Aluminum Rod Handle Voice Prompt Button Air Outlet LED Display 4. DISPLAY SCREEN...
-
Page 6: Assemble Your Wet Dry Vacuum Cleaner
Assemble Your Wet Dry Vacuum Cleaner Assemble Your Wet Dry Vacuum Cleaner 1. Installation of the Handle Assembly: 2. Mounting of the Accessories: Install the accessory holders into the charging base as indicated. ASSEMBLE The handle assembly is consisted of a handle and an aluminum rod. -
Page 7: Operate Your Wet Dry Vacuum Cleaner
• When the appliance is fully charged, it will automatically stop charging. If it is still charging after the normal charging NOTE: Only add water or Schenley specified cleaning agent to the clean water tank. time, please unplug the power adapter immediately and contact Schenley customer service. - Page 8 Operate Your Wet Dry Vacuum Cleaner Operate Your Wet Dry Vacuum Cleaner Press the water spray button to spray water to the front of the cleaner. This will allow water to be dispensed precisely to the desired cleaning area. 3. Pour out the dirty water and rinse the tank with 4.
-
Page 9: Clean & Maintenance
1. Self-Cleaning Function: 2. Clean your Wet Dry Vacuum Cleaner After using Schenley wet dry vacuum cleaner, place the appliance back to the Please shut down the cleaner before cleaning your device. charging base. Ensure that the clean water tank has sufficient water. Press the self-cleaning button on the right side of the cleaner body to initiate self-cleaning. -
Page 10: Technical Specifications
Failure to do so may result in product damage and human injury. • We recommend replacing your roller brush and HEPA filer every 2-3 months to avoid odor or contamination. You may purchase replacement parts and other accessories through Schenley. -
Page 11: Troubleshooting
Troubleshooting Troubleshooting Issue Scenarios Possible Reasons Solutions Issue Scenarios Possible Reasons Solutions Charge the cleaner by placing it The cleaner is out of battery. Roller brush may be stuck. Open roller brush cover and on the charging base. clear the stuck. The cleaner is in the upright Tilt the cleaner main body to The cleaner is not charging. -
Page 12: Warranty And Customer Service
Instagram: @SchenleyTech This warranty does not apply to: 1 ) Any non-Schenley wet dry vacuum cleaner product or accessories even if packaged or sold with the product; 2) Damage caused by use with non-Schenley wet dry vacuum cleaner product or accessories;...
Need help?
Do you have a question about the SLFCWD064 and is the answer not in the manual?
Questions and answers