Related Manuals for AIMS Power LFP24V400A
Summary of Contents for AIMS Power LFP24V400A
- Page 1 Lithium Battery Pack 24V / 48V LFP24V400A / LFP48V200A LiFePO4 Version 1.0 Read the instruction manual before installation and operation.
- Page 2 AIMS Power www.aimscorp.net This manual is for the AIMS Power 24V/48V battery pack only and may not be copied or used in any other form. The information included in this manual is based on the product at the time of publication. However, this manual is subject to change without prior notice.
-
Page 3: Table Of Contents
AIMS Power www.aimscorp.net Table of Contents Contents 1 Safety Information ................................4 1.1 Symbols ..................................4 1.2 Safety Precautions ..............................5 1.3 Battery Handling Guide ............................5 1.4 Response to Emergency Situations .......................... 5 1.5 Users / Operators ..............................6 1.6 Recycling &... -
Page 4: Safety Information
AIMS Power www.aimscorp.net 1 Safety Information 1.1 Symbols Caution. Risk of electric shock Do not place or install near flammable or explosive materials Install the product out of reach of children Heavy! May cause serious injury to the back Do not dispose of the product with household wastes... -
Page 5: Safety Precautions
AIMS Power www.aimscorp.net 1.2 Safety Precautions Operators and installers are responsible for familiarizing themselves with the contents of this manual and note all warnings before operating. The battery operates under possible dangerous voltages and AIMS Power strongly recommends all installations be performed by qualified and trained professionals. -
Page 6: Users / Operators
(backup) systems Knowledge of the dangers and risks associated with installing and using electrical devices at • possible dangerous voltages is the responsibility of the user not AIMS Power Electrical certification and/or training is strongly recommended • Make sure all power is off and wires are disconnected when maintaining/servicing the battery 1.6 Recycling &... -
Page 7: Product Introduction
This battery is packed with power and delivers efficient power for battery systems requiring large amounts of power at 24 or 48 Volt. The AIMS Power 24V 400 amp or 48V 200 amp has large amp capacity in one battery and eliminates the need for multiple batteries without losing amperage. Compared to other battery technologies, this battery delivers large amounts of power, at half the weight and provides up to 8 times more cycles. -
Page 8: Mechanical Layout
AIMS Power www.aimscorp.net 2.3 Mechanical Layout - 8 -... - Page 9 AIMS Power www.aimscorp.net 24V & 48V: Same design, dimensions, and features. - 9 -...
-
Page 10: Electrical Performance
AIMS Power www.aimscorp.net 2.4 Electrical Performance Battery Technology Specification Model LFP24V400A LFP48V200A Nominal Voltage 25.6Vdc 51.2Vdc Battery Voltage Battery Rated Capacity 400Ah 200Ah Battery Rated Energy 10.24 kWh 10.24 kWh Battery Cell Type Prismatic Pouch Battery Cell 3.2V 100AH 3.2V 100AH... -
Page 11: Bms
AIMS Power www.aimscorp.net 2.5 BMS The battery contains an internal LiFePO4 Battery Management System (BMS) that monitors and optimizes each single prismatic cell during charge & discharge and protects the battery pack of overcharge, over discharge and short circuit. Stage... -
Page 12: Packaging
AIMS Power www.aimscorp.net 2.6 Packaging Battery is specifically packaged to ensure that it is not exposed to any harmful gases, chemical contamination, electrostatic, water or mechanical damage during handling, transportation and storage. The box is marked with the name of the product, the type and size of the product, the date of production, the quantity and the batch number for proper tracking. -
Page 13: Installation
AIMS Power www.aimscorp.net 3 Installation 3.1 Location • There must be no flammable or explosive materials near the battery • The recommended ambient temperature should be -10° ~ 45°C /14°~113°F Operating temperature of -20° ~ 65°C /-4°~149°F • Install and store indoors – keep out of wind, snow, rain and direct sun •... -
Page 14: Tools & Safety
AIMS Power www.aimscorp.net 3.3 Tools & Safety Tools The following tools are required to install the battery pack: Level Screwdriver M8 & M10 Torque wrench Drill Pencil or Marker Safety gear for personal protection It is recommended to wear the following safety gear when handling the battery pack. -
Page 15: Mounting Flange
AIMS Power www.aimscorp.net 3.4 Mounting flange CAUTION! Do not use if battery is damaged! 3.5 System Clearance Battery requires adequate clearance for installation, cabling and airflow. See below for minimum clearance recommendation: Inverter Battery Battery - 15... -
Page 16: Battery Pack Installation
3.7 DC Wiring AIMS Power recommends keeping the battery pack as close as possible to the DC load. Refer to the below chart for minimum wire size. If the length of cable is longer than 4 feet, use the next larger size of cable. -
Page 17: Operation
3. If the battery pack initializes successfully, the RUN LED indicator on the front will turn green. The SOC LED indicator will show the current capacity. 4.Turn on inverter. CAUTION If battery doesn’t turn on and indicates a FAULT or fails to operate, do not use the battery pack and contact AIMS Power. - 17... -
Page 18: Led Indicators
4.3 LED Indicators The LED indicators on the front of the battery pack show its operational state as follows: RUN LED(green) System working normal once/3S Flash: system warning Alarm LED(red) once/1S Flash: system protection Lit continuously: system fault In Charging Mode SOC<25%, LED1, LED2, LED3, LED4 flash in turn 25%<SOC <50%, LED1 lit, LED2, LED3, LED4 flash in turn 50%<SOC<75%, LED1, LED2 lit, LED3, LED4 flash in turn... -
Page 19: Communication
4.5 Communication 4.5.1 CAN Port for PC Monitoring Connect the CAN communication card from the battery pack to the computer, after installing the AIMS Power LiFePO4 monitor, the information displays on 7 different tabs. 1. Main Info tab: SOC%, voltage, current, cycles, capacity and running status 2. - Page 20 - 20...
- Page 21 - 21...
- Page 22 - 22...
-
Page 23: Troubleshooting
The fault state is cleared when the battery pack recovers to normal operation. If battery pack is not working correctly and the issue persists, contact a qualified technician or AIMS Power. If the battery pack or the inverter indicates FAULT or fails to operate, contact AIMS Power immediately. 6 Warranty AIMS Power lithium batteries include a 10 year limited , prorated, warranty against manufacturer defects. - Page 24 614-17081-00...
Need help?
Do you have a question about the LFP24V400A and is the answer not in the manual?
Questions and answers