Connection Options - LG 42PM1M-UC Owner's Manual

Introduction

Connection Options

Connection Options
- Connection panels shown may be somewhat different from your Monitor.
RS-232C INPUT
HDMI/
(CONTROL/SERVICE) DVI(VIDEO)
1 2
1. RS-232C INPUT(CONTROL/SERVICE) PORT
Connect to the RS-232C port on a PC.
2. HDMI/DVI (VIDEO)
Connect a HDMI signal to this jack. Or connect a DVI(Video)
signal.
3. REMOTE CONTROL / AUDIO INPUT (for RGB, DVI)
4. RGB INPUT
Connect the set output connector from a PC to the
appropriate input port.
RGB OUTPUT
You can watch the RGB signal on another set, connect RGB
OUTPUT to another set's PC input port.
5. VARIABLE AUDIO OUTPUT
6. EXTERNAL SPEAKER (8 ohm output)
Connect to optional external speaker(s).
* For further information, refer to 'Speaker & Speaker
Stand' manual.
7. COMPONENT INPUT
Connect a component video/audio device to these jacks.
8 Plasma Monitor
AUDIO AUDIO
REMOTE
RGB OUTPUT
CONTROL
R L
VARIABLE AUDIO OUT EXTERNAL SPEAKER
AUDIO INPUT RGB INPUT
4
3 5
R L
R
VIDEO AUDIO
6
7
8. VIDEO/AUDIO IN/OUT SOCKETS
Connect the video/audio out sockets of external equipment
to these sockets.
S-VIDEO/AUDIO IN SOCKETS
Connect the S-VIDEO out socket of an VCR to the S-VIDEO
socket.
Connect the audio out sockets of the VCR to the audio sock-
ets as in AV.
MONITOR OUT
Connect a second Set or monitor.
9. POWER CORD SOCKET
This the set operates on an AC power. The voltage is indicat-
ed on the Specifications page. Never attempt to operate the
set on DC power.
COMPONENT INPUT 2 MONITOR OUT
COMPONENT INPUT 1 A/V INPUT
L
R L
(MONO)
AUDIO
VIDEO
8
AC INPUT
9
S-VIDEO