Wisenet SBP-C14PS1 Installation And Operation Manual

SBP-C14PS1
INSTALLATION AND OPERATION MANUAL
SBP-C14PS1
CARD CAGE POWER SUPPLY
The SBP-C14PS1 integral 115/230 VAC power supply provides for the elimination of
a single-point failure in the event of a major fault within any module located within
the SBP-C14 chassis rack, through the use of automatic electronic current limiting
within each rack-mountable module.
In the SBP-C14PS1 design only the faulty module shuts down, and the operation
of the other modules within the rack continue unimpaired. This automatic current
limiting feature is also self-resetting, should the fault or overload be of a temporary
or intermittent condition.
The SBP-C14PS1 is intended to be installed in the SBP-C14 Card Cage only. Any
other applications are not supported. See Page 4 for installation instructions.
INS_SBP-C14PS1_REVA 08/12/19 PAGE 1