Soundcore Frames - Audio Glasses with OpenSurround Manual

SUPPORT

For FAQs, detailed user manual and more information, please visit www.soundcore.com/support

APP

Google Play and the Google Play logo are trademarks of Google Inc.

Apple and the Apple logo are trademarks of Apple Inc.

Download the Soundcore app to set up the frames, customize EQ, update firmware, and explore more. Ensure to keep the firmware up to date before each use.

ASSEMBLING

Push the audio temples into position on the hinges so they are securely attached.

SETTING UP

When you connect both audio temples to the charging cable, the LED indicator on the charging cable will turn green. Wait for 1 minute, then wear your Soundcore Frames. They will automatically power on and enter Bluetooth pairing mode. When you hear the prompt voice, select "Soundcore Frames" on your device's Bluetooth list to connect.

POWERING ON/OFF

Soundcore Frames will automatically power on when you wear them. After removing them they will power off after 2 minutes.

ON

OFF

CONTROLS

x2: Tap twice

Slide forward/backward (logo area)

Touchpad controls can be customized in the Soundcore app.

VOICE CONTROL

You can enable voice control and choose your language in the Soundcore app.

Easily control with no wake up word. Only the 8 voice commands above are supported.

RE-PAIRING

To pair with another device, wear them and press and hold the logo area on both audio temples for 3 seconds until you will hear the voice prompt.

WEARING DETECTION

The playback will auto-pause when taking Soundcore Frames off, and it will resume when you wear them.

RESET

Press and hold the logo area on both audio temples for 10 seconds until you hear the voice prompt.

DISASSEMBLING

If you want to change the frames, hold the quick release hinges and pull the audio temples slightly to disassemble.

For FAQs and more information, please visit:
soundcore.com/support

@SoundcoreAudio

@soundcoreaudio

@soundcoreaudio

Model: A3600L, A3600R 51005002908 V2