Download
Share
Print this page
Bilt Backyard Discovery SWEETWATER Manual
  1. Manuals
  2. Brands
  3. Bilt Manuals
  4. Play Sets & Playground Equipment
  5. Backyard Discovery SWEETWATER
  6. Manual

Bilt Backyard Discovery SWEETWATER Manual

Playhouse
Hide thumbs

Advertisement

Quick Links

Download this manual
Basepoint Business Centre: Rivermead Drive,Westlea, Swindon SN5 7EX Phone: 0800-118-2476
J.P. Coenstraat 7, The Bridge, The Hague, 2595 WP, Netherlands Phone: 0800-567-8990
SWEETWATER
PLAYHOUSE
Model # 2303010
WARNING
Adult Assembly Required.
The assembly manual must be retained since it contains important information
Not suitable for children under 24 months due to small parts.
FOR DOMESTIC USE ONLY. INTENDED FOR OUTDOOR USE.
CAN ICES-003 (B)/NMB-003(B)
For the most up to date assembly manual, to register your set, or to order replacement parts
Para obtener instrucciones en español, visite www.backyarddiscovery.com
MANUFACTURED BY:
Backyard Discovery
3305 Airport Drive, Pittsburg, KS 66762
800-856-4445
Please visit www.backyarddiscovery.com
INS-2303010-A-SWEETWATER-ENG 09/19/22
Made in China

Advertisement

loading
Need help?

Need help?

Do you have a question about the Backyard Discovery SWEETWATER and is the answer not in the manual?

Questions and answers

Related Manuals for Bilt Backyard Discovery SWEETWATER

Summary of Contents for Bilt Backyard Discovery SWEETWATER

  • Page 1 MANUFACTURED BY: Backyard Discovery 3305 Airport Drive, Pittsburg, KS 66762 800-856-4445 Basepoint Business Centre: Rivermead Drive,Westlea, Swindon SN5 7EX Phone: 0800-118-2476 J.P. Coenstraat 7, The Bridge, The Hague, 2595 WP, Netherlands Phone: 0800-567-8990 SWEETWATER PLAYHOUSE Model # 2303010 WARNING Adult Assembly Required. The assembly manual must be retained since it contains important information Not suitable for children under 24 months due to small parts.
  • Page 2 Basic Setup Dimensions & Assembly Notes Owner's Manual Selecting the correct location for your play product is important for your children’s safety and the product’s longevity The safe play area refers to a zone extending 6'-7" (2m) beyond the play product on all sides, including the space •...
  • Page 3 Electronics Safety Warnings Owner's Manual CLASS B DIGITAL DEVICE STATEMENT Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 4: Parts Identification

    Parts Identification Owner's Manual Wood Components (Not to Scale) COUNTER TOP SUPPORT - W4L17067 SIDE WINDOW SHELF - W4L17072 1 3/8”x4 3/8”x5 7/8” (36x112x150) 5/8”x2 3/8”x18 7/8” (16x60x479) (x1) (x2) COUNTER TOP SUPPORT - W4L17068 REAR WINDOW SHELF - W4L17073 1”x2 3/8”x5 7/8”...
  • Page 5 Parts Identification Owner's Manual Wood Components (Not to Scale) LEFT FRONT CORNER PANEL - W2A03682 RIGHT FRONT CORNER PANEL - W2A03685 LENGTH 38 9/16" (980) (x1) (x1) LENGTH 38 9/16" (980) RIGHT REAR CORNER PANEL - W2A03691 LEFT REAR CORNER PANEL - W2A03688 (x1) LENGTH 38 9/16"...

  • Page 6: Hardware Components

    Owner's Manual Parts Identification Hardware Components H100090 SCREW PFH (x6) 8x2 1/2" H100137 BOLT WH H100124 (x4) SCREW PFH 1/4x1 (x2) 8 x 1/2 H100086 SCREW PFH (x22) 8x1 1/2 H100140 NUT BARREL WH H100070 SCREW PWH (x4) 1/4x7/8 (x8) 8x3/4 H100087 SCREW PFH...
  • Page 7 Owner's Manual Parts Identification Accessory Components (Not to Scale) A6P00025 A6P00387 STOVE KIT (x1) FLOWER POT HOLDER - BLK (x2) A6P00020 KNOB KIT A100132 (x1) PHONE KIT (x1) A6P00024 FAUCET KIT (x1) BE SURE TO WASH ALL PLASTIC TOYS BEFORE USE. A6P00336 A6P00337 A6P00338...
  • Page 8 Owner's Manual Parts Identification Accessory Components (Not to Scale) A4M00517 METAL TIE STRAP (x1) A6P00032 SURFACE MOUNT BASIN (x1) A4M00528 BYD ID TAG (MEDIUM) AGES 2 TO 10 (x1) A6P00290 DOOR BELL PLATE A100174 (x1) DOOR BELL (x1)

  • Page 9: Hardware Parts

    STEP 1 PRE-ASSEMBLY - SORTING PARTS It is critical for ease of assembly that you take the time to sort and organize the wood and hardware. WOOD PARTS: • Organize wood parts by the three-digit, alpha-numeric number stamped on each board (ex. P01). •...
  • Page 10 STEP 2 PRE-ASSEMBLY - TOOLS REQUIRED Drill Attachments: Phillips Head Open End Wrenches 1/2" & 9/16" 1/8", 3/16", 3/8" & 7/16" Drill Bits 3/8" Drive Ratchet, 1/2" & 9/16" STD Sockets 1/2" & 9/16" Deep Sockets Phillips Screw Driver Cordless Drill or Electric Drill Rubber Mallet - Optional Claw Hammer...
  • Page 11 There are several types of assembly instructions available to you. 1. Printed Assembly Manual included with your set 2. BILT APP - 3D interactive instructions 3. Combination of the Printed Manual and BILT APP (Note: Step numbers can differ between the two methods)
  • Page 12 STEP 1 LEFT REAR CORNER PANEL - W2A03688 (x1) LENGTH 38 9/16" (980) LEFT FRONT CORNER PANEL - W2A03682 (x1) LENGTH 38 9/16" (980) RIGHT REAR CORNER PANEL - W2A03691 (x1) LENGTH 38 9/16" (980) RIGHT FRONT CORNER PANEL - W2A03685 LENGTH 38 9/16"...
  • Page 13 STEP 2 H100085 SCREW PFH (x10) LOWER CENTER WALL - W2A03694 UPPER CENTER WALL - W2A03695 1 1/2"x6 9/16"x20 7/8" (38x167x530) (x1) (x1) 1 1/2"x9 3/4"x20 7/8" (38x248x530) NOTE: ALIGN PANELS AS SHOWN BELOW THEN PRE-DRILL PILOT HOLES USING AN 1/8" [3 mm] DRILL BIT, 1/2" [12 mm] DEEP FOR HARDWARE. (x1) LOWER CENTER WALL (x1)
  • Page 14 STEP 3 H100085 SCREW PFH LOWER REAR CENTER WALL - W2A03697 (x10) UPPER REAR CENTER WALL - W2A03696 (x1) 1 1/2"x6 9/16"x21 1/8" (38x167x536) 1 1/2"x9 3/4"x21 1/8" (38x248x536) (x1) NOTE: ALIGN PANELS AS SHOWN BELOW THEN PRE-DRILL PILOT HOLES USING AN 1/8"...
  • Page 15 STEP 4 H100085 SCREW PFH (x10) LOWER CENTER WALL - W2A03694 UPPER CENTER WALL - W2A03695 1 1/2"x6 9/16"x20 7/8" (38x167x530) (x1) (x1) 1 1/2"x9 3/4"x20 7/8" (38x248x530) NOTE: ALIGN PANELS AS SHOWN BELOW THEN PRE-DRILL PILOT HOLES USING AN 1/8" [3 mm] DRILL BIT, 1/2" [12 mm] DEEP FOR HARDWARE. (x1) UPPER CENTER WALL (x10)

  • Page 16: Side View

    STEP 5 H100088 SCREW PFH (x6) 8x1 1/8 DOOR ASSEMBLY - W2A03681 1 1/4"x13 1/8"x17 15/16" (32x334x456) (x1) SIDE VIEW NOTE PILOT HOLES (x6) SCREW - 1 1/8" (x1) DOOR ASSEMBLY...
  • Page 17 STEP 6 A4M00517 H100070 SCREW PWH METAL TIE STRAP (x1) (x8) 8x3/4 TIP: ALIGN TIE STRAP WITH PILOT HOLES AND ASSEMBLE AS SHOWN. NOTE PILOT HOLES (x8) SCREW - 8x3/4" (x1) METAL TIE STRAP...
  • Page 18 STEP 7 H100090 SCREW PFH (x4) 8x2 1/2" HEADER ASSEMBLY - W2A03698 3 3/8"x37 7/8"x38 7/8" (86x962x986) (x2) NOTE: REST HEADER ASSEMBLIES ON THE WALL PANELS AND ASSEMBLY AS SHOWN. (x2) NOTE NOTCH HEADER ASSEMBLY LOCATION. (x4) SCREW - 2 1/2"...
  • Page 19 STEP 8 H100087 SCREW PFH (x32) 8x1 1/4 TIE STRAP - W4L17075 5/8”x2”x3 1/8” (16x50x80) (x8) (x8) TIE STRAP NOTE PILOT HOLES (x32) SCREW - 1-1/4"...
  • Page 20 STEP 9 GABLE BOARD - W4L17070 H100140 H100137 BOLT WH H100138 WASHER LOCK EXT H100139 WASHER LOCK EXT NUT BARREL WH 5/8”x4 3/8”x25 3/8” (16x112x643) (x4) (x4) (x4) (x4) 8x15 (x4) 1/4x7/8 1/4x1 6x15 (x4) BOLT WH - 1" (x4) WASHER - 6x15 (x4) WASHER - 8x15...
  • Page 21 STEP 1 0 TRIANGLE SUNBURST - W4L17069 5/8”x5 1/4”x10 3/8” (16x134x265) (x2) H100086 SCREW PFH H100088 SCREW PFH (x4) (x20) 8x1 1/2 8x1 1/8 SUNBURST LEG - W4L17076 SUNBURST LEG - W4L17077 5/8”x2 3/8”x9 7/8” (16x60x250) (x2) (x4) 5/8”x2 3/8”x8 1/4” (16x60x210) (x1) SUNBURST LEG (x6)
  • Page 22 STEP 1 1 H100086 SCREW PFH (x8) 8x1 1/2 UPPER ROOF PANEL - W2A02983 (x2) 1 3/8"x12 3/4"x44 7/8" (35x324x1140) REPEAT ON OPPOSITE END (x4) SCREW - 1 1/2" (x2) UPPER ROOF PANEL...
  • Page 23 STEP 1 2 H100086 SCREW PFH (x8) 8x1 1/2 LOWER ROOF PANEL - W2A02982 1 3/8"x13"x44 7/8" (35x329x1140) (x2) REPEAT ON OPPOSITE END (x4) SCREW - 1 1/2" (x1) LOWER ROOF PANEL (x1) LOWER ROOF PANEL...

  • Page 24: Inside View

    STEP 1 3 H100087 SCREW PFH (x2) 8x1 1/4 SIDE WINDOW SHELF - W4L17072 5/8”x2 3/8”x18 7/8” (16x60x479) (x1) INSIDE VIEW FLUSH (x2) SCREW - 1-1/4" (x1) SIDE WINDOW SHELF...
  • Page 25 STEP 1 4 H100087 SCREW PFH REAR WINDOW SHELF - W4L17073 (x2) 8x1 1/4 5/8”x2 3/8”x19 1/8” (16x60x485) (x1) INSIDE VIEW FLUSH (x2) SCREW - 1-1/4" (x1) REAR WINDOW SHELF...
  • Page 26 STEP 1 5 H100087 SCREW PFH (x2) 8x1 1/4 SIDE WINDOW SHELF - W4L17072 (x1) 5/8”x2 3/8”x18 7/8” (16x60x479) INSIDE VIEW FLUSH (x2) SCREW - 1-1/4" (x1) SIDE WINDOW SHELF...
  • Page 27 STEP 1 6 H100090 SCREW PFH (x2) 8x2 1/2" COUNTER TOP SUPPORT - W4L17067 (x1) 1 3/8”x4 3/8”x5 7/8” (36x112x150) NOTE: ALIGN PILOT HOLES IN D1 AND ASSEMBLE. (x1) COUNTER TOP SUPPORT (x2) SCREW - 2 1/2"...
  • Page 28 STEP 1 7 H100087 SCREW PFH (x4) 8x1 1/4 COUNTER TOP SUPPORT - W4L17068 (x2) 1”x2 3/8”x5 7/8” (24x60x150) INSIDE VIEW 7/8 in [22 mm] (x1) COUNTER TOP SUPPORT (x2) SCREW - 1-1/4" REPEAT ON OPPOSITE WALL...
  • Page 29 STEP 1 8 1/2 in 3/8 in [12 mm] [9 mm] H100087 SCREW PFH (x8) 8x1 1/4 COUNTER TOP - W4L17071 (x4) 5/8”x3 3/8”x18 1/2” (16x86x469) TOP VIEW 1/2 in 3/8 in [12 mm] [9 mm] CORRECT BOARD ASSEMBLY (x8) SCREW - 1-1/4"...

  • Page 30: Front View

    STEP 19 H100086 SCREW PFH (x2) 8x1 1/2 A6P00024 FAUCET KIT (x1) FRONT VIEW 1 in [25 mm] (x2) SCREW - 1 1/2" (x1) FAUCET KIT...
  • Page 31 STEP 20 H100128 SCREW PWH (x2) 8x5/8 A6P00032 SURFACE MOUNT BASIN (x1) FRONT VIEW 3/8 in [9 mm] (x2) SCREW - 5/8 (x1) SURFACE MOUNT BASIN...
  • Page 32 STEP 21 H100088 SCREW PFH (x4) 8x1 1/8 A6P00025 STOVE KIT (x1) (x4) SCREW - 1 1/8" 1 1/8 in [29 mm] (x1) STOVE KIT...
  • Page 33 STEP 22 H100087 SCREW PFH (x3) 8x1 1/4 DOOR STOP - W4L17074 5/8”x2 3/8”x3 7/8” (16x60x100) (x1) (x1) DOOR STOP (x3) SCREW - 1-1/4" 1 5/8 in [40 mm]...
  • Page 34 STEP 23 A6P00020 KNOB KIT (x1) TIP: WHEN DOOR LATCH IS IN THE UNLOCKED POSITION IT SHOULD FACE IN THE UPWARD DIRECTION. NOTE: ALIGN FACE PLATE AS SHOWN BELOW THEN PRE-DRILL PILOT HOLES USING AN 1/8" [3 mm] DRILL BIT, 1/2" [12 mm] DEEP FOR HARDWARE.
  • Page 35 STEP 24 H100124 SCREW PFH (x2) 8 x 1/2 A100132 PHONE KIT (x1) TIP: CENTER PHONE AND MOUNT USING THE DIMSENSION BELOW OR YOUR DESIRED LOCATION. (x1) PHONE KIT (x2) SCREW PFH 8x1/2...
  • Page 36 STEP 25 H100085 SCREW PFH (x8) A6P00387 FLOWER POT HOLDER - BLK (x2) REPEAT ON OPPOSITE SIDE (x1) FLOWER POT HOLDER - BLK (x4) SCREW - 1" NOTE HOLE LOCATIONS...
  • Page 37 STEP 26 H100361 SCREW PWH (x2) 8x7/16 A4M00528 BYD ID TAG (MEDIUM) AGES 2 TO 10 (x1) (x1) BYD ID TAG (MEDIUM) AGES 2 TO 10 (x2) SCREW - 7/16"...
  • Page 38 STEP 27 H100537 SCREW PFH SD H100624 SCREW PFH BLK (x2) (x2) 6x5/8 A100174 A6P00290 DOOR BELL DOOR BELL PLATE (x1) (x1) NOTE PILOT HOLES. (x1) DOOR BELL PLATE & RUBBER BUTTON (x1) DOOR BELL (x2) SCREW - 5/8" (x2) SCREW - 1"...
  • Page 39 STEP 28 A100174 DOOR BELL (x1) FCC LABEL NOTE: NOTE: -DO NOT MIX OLD AND NEW THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. BATTERIES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: -DO NOT MIX ALKALINE, (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, STANDARD (CARBON-ZINC), OR INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED...

This manual is also suitable for:

2303010