Advertisement
Advertisement
Table of Contents
Summary of Contents for RV Tech LORATECH
- Page 1 LORATECH Outdoor Gateway ALU Quick Start Guide Ver. 2018-11-04-12...
- Page 2 If the network does not support DHCP, the Gateway will use a fallback address of 192.168.1.77. • Connect in with SSH client (e.g. PUTTY) with default login (loratech/loratech). • By editing the file /etc/dhcpcd.conf a customized IP configuration can be setup. A customized setup may look like this: # Custom static IP address for eth0.
- Page 3 5) Setting up 4G connection (optional) The configuration for GSM / LTE is in file /etc/wvdial.conf The file may look like this: [Dialer play] Modem = /dev/ttyUSB1 Baud = 115200 Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 Init3 = AT+CGDCONT=1,"IP","internet" Stupid Mode = 1 ISDN = 0 Dial Command = ATD...
Need help?
Do you have a question about the LORATECH and is the answer not in the manual?
Questions and answers