Advertisement
Quick Links
Contact us:
: info@autosaver88.com
- Please read this installation manual before installing this part. Protect your car properly in the
event of any scratches.
- After installation, you may need to re-tighten all hardware periodically to ensure safety.
- The installation pictures are only for your reference. There may be some differences between
the image and the actual part, but it does not affect the installation.
BULL BAR FOR
BULL BAR FOR
TACOMA 05-15
TACOMA 05-15
- 1 -
ITEM NO.:YA-004
Advertisement
Summary of Contents for YITAMOTOR YA-004
- Page 1 ITEM NO.:YA-004 Contact us: : info@autosaver88.com BULL BAR FOR BULL BAR FOR TACOMA 05-15 TACOMA 05-15 - Please read this installation manual before installing this part. Protect your car properly in the event of any scratches. - After installation, you may need to re-tighten all hardware periodically to ensure safety.
- Page 2 - 2 -...
- Page 3 STEP 1 STEP 1 Remove the 2 X M14 nuts of the original car with a wrench. (As shown in Figure 1) PIC 1 STEP 2 STEP 2 Install bracket 1 with the original car bolts and nuts. Do not tighten at this time. (As shown in Figure 2) PIC 2 - 3 -...
- Page 4 STEP 3 STEP 3 Mounting the bracket 1 to the car frame. There is no difference for mounting left and right bracket. 1) Insert the M10 large washer (No. 7) into the M10 bolt (No. 5), and put the thicken washer (No. 4) between the body beam and the bracket 1. 2) Insert the bolt into the bracket 1 and the car girders, use the thicken washer (No.
- Page 5 STEP 5 STEP 5 Connect the two kinds of brackets. There are four groups of mounting hardware for connecting the Bracket 1 and Bracket 2 as shown. Use the M10 bolts (No. 6), 2 x M10 large washer (No. 7), M10 spring washer (No. 8) and M10 nut (No. 9) in turn for each mounting hole.
- Page 6 If you get in trouble regarding: 1.Product and hardware didn't fit your car 2.Missed required mounting hardware 3.Received a damaged product 4.Received a wrong product Contact us : info@autosaver88.com - 6 -...