Table of Contents
Advertisement
Quick Links
TOOLS
MEASURING
SCREW DRIVER
TAPE
COMPATIBILITY & WEIGHT
BRAND/MODEL
NISSAN/NAVARA
TOYOTA/HILUX
VOLKSWAGEN/AMAROK
FORD/RANGER
MITSUBISHI/L200
FIAT/FULLBACK
MERCEDES-BENZ/X-CLASS
ISUZU/D-MAX
SECURITY INFORMATION
1.
Park the vehicle on a flat surface, activate the parking brake and turn off the engine.
2.
Disconnect the negative battery pole.
3.
Prepare all tools before starting the assembly.
4.
Wear non-slip glove and protective footwear during the installation process.
5.
Never drive vehicle with the cap door or windows open.
6.
Never use the cap for human or live animal transportation.
7.
Contact the vehicle's insurance company to make them aware you have added a cap to the vehicle.
8.
Electrical operations must be performed by a skilled operator or in a autorized service. Roxform DOES NOT take any
responsibilities for any damage which result from electrical operations.
9.
Electrical connection process is an operation on the electrical system of the vehicle. So, vehicle may be out off warranty after
this process.
NOTE: Paint technologies can change at each plant on the same vehicles. Waterborne, base-coat or high solids paint can be used
on the same color.
MAINTENANCE
DO NOT wipe the cap with a dry cloth.
1.
2.
DO NOT wash the cap with a commercial high-pressure car washes or DO NOT wipe or polish for 3 months. It takes 3
months to cure the fresh paint completely.
3.
DO NOT contact the cap with chemicals such as solvents.
4.
Wash and polish the cap regularly with a product designed to preserve and protect painted fiberglass after 3 months.
5.
Lubricate door hinges and door lock(s) mechanisms monthly with an oil-based lubricant. Do not use silicone or petroleum
distillate spray lubricant on gas props.
6.
Tighten four bolts (fixing clamps) after first week. Then, check the tightness of bolts every 6 months.
WRENCH
SOFT HAMMER
10 mm
13 mm
17 mm
FULLBOX
CABINET
45 KG
50 KG
45 KG
50 KG
48 KG
55 KG
45 KG
52 KG
45 KG
50 KG
45 KG
50 KG
N/A
N/A
45 KG
52 KG
Installation MANUAL
CLAMP
NON-SLIP GLOVE
STARBOX
FLYBOX
45 KG
N/A
N/A
75 KG
48 KG
80 KG
N/A
75 KG
45 KG
N/A
45 KG
N/A
N/A
80 KG
N/A
N/A
GRAND BOX
PROTECTIVE
FOOTWEAR
SUPERBOX
N/A
46 KG
53 KG
N/A
N/A
N/A
50 KG
N/A
Advertisement
Table of Contents
Summary of Contents for ROXFORM FULLBOX
- Page 1 Contact the vehicle’s insurance company to make them aware you have added a cap to the vehicle. Electrical operations must be performed by a skilled operator or in a autorized service. Roxform DOES NOT take any responsibilities for any damage which result from electrical operations.
- Page 2 INSTALLATION MANUAL GRAND BOX INSTALLATION If required, cut the plastic cover of truck edge. Clean upper surface of truck edge with a dry and soft fabric. NOTE: Never use any chemical components for cleaning. Place the cap on to the truck edge with 4 persons.
- Page 3 Take the supply voltage directly from the main battery. NOTE: Electrical operations must be performed by a skilled operator or in a autorized service. Roxform DOES NOT take any responsibilities for any damage which result from electrical operations. Connect the electrical cables as shown in the figure.
Need help?
Do you have a question about the FULLBOX and is the answer not in the manual?
Questions and answers