Summary of Contents for ROSCO HVAC SkelStart
- Page 1 engine start module installation guide and user manual Skeleton Technologies 24V / CCA 6,033 5 PCS 24 V ENGINE START MODULES PARALLEL FOR 24 V SYSTEM Keep this user manual in your vehicle. www.roscohvac.com...
- Page 2 The battery The battery Negative (-) Terminal Positive (+) Terminal The SkelStart ESM enables drivers to start a vehicle (ground connection) engine in situations where the engine cannot be started by normal batteries owing to, for example, extreme weather conditions or aged batteries, or where there is insufficient power in the batteries to start the engine.
- Page 3 ON. This is achieved by holding the power SkelStart B+ terminals to the 24 V line on the button for each SkelStart down for 5 seconds to batteries (Fig. 3 cable 6). The cable size should be at activate separately.
- Page 4 Make sure that the batteries are in charged to resistance conductor to discharge the SkelStart specified limit Make sure that SkelStart is turned on and ready to Using a voltmeter, measure the voltage between use. This can be done by pressing the button. After the “S+”...
- Page 5 ROSCO HVAC CORP. ROSS WERT 780.607.4272 rwert@roscohvac.com Copyright © 2020 Skeleton Technologies. All rights reserved. 02-SMC-170609-2A5X...
Need help?
Do you have a question about the SkelStart and is the answer not in the manual?
Questions and answers