Advertisement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JuiceBar 320 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Oasis Charger JuiceBar 320 Series

  • Page 2: Table Of Contents

    INTERNAL COMPONENTS & ASSEMBLY............INSTALLATION REQUIREMENTS SITE SELECTION....................MOUNTING INSTRUCTIONS................WIRING INSTRUCTIONS..................COMMUNICATIONS..................... OPERATING INSTRUCTIONS GENERAL INFORMATION..................NETWORK CHARGER INFORMATION............. NON-NETWORK CHARGER INFORMATION............. TROUBLESHOOTING..................MAINTENANCE & REPAIRS GENERAL INFORMATION................... CONTACT INFORMATION................... STANDARD WARRANTY..................Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 3: General Information

    PUBLICATION NOTICE This installation manual includes the latest information at the time of printing. Oasis Charger Corporation reserves the right to revise this manual and its JuiceBar Gen 3 charger products from time to time without further notice. If you have questions about the use or installation of this product, contact our offices at 860-308-2054 or email us at support@JuiceBarEV.com.
  • Page 4: Symbols & Important Safety Messages

    Warning, Caution or Statement Related to Wiring. Ce symbole signifie qu’il y a un risque de choc électrique et précède un Avertissement, Attention ou Instruction liées à câblage. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 5: Technical Specifications

    16” Width Without Connectors 12” Depth CORD LENGTH 18 feet CONNECTORS SAE J1772 Type 1 ENCLOSURE Type 3R Aluminum OPTIONS Wall Bracket Pedestal Mount Branded Door Graphics USER INTERFACE LED Indicators RFID Card Reader Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 6: 400 Series

    16” Width Without Connectors 12” Depth CORD LENGTH 18 feet CONNECTORS SAE J1772 Type 1 ENCLOSURE Type 3R Aluminum OPTIONS Wall Bracket Pedestal Mount Branded Door Graphics USER INTERFACE LED Indicators RFID Card Reader Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 7: 480 Series

    16” Width Without Connectors 12” Depth CORD LENGTH 18 feet CONNECTORS SAE J1772 Type 1 ENCLOSURE Type 3R Aluminum OPTIONS Wall Bracket Pedestal Mount Branded Door Graphics USER INTERFACE LED Indicators RFID Card Reader Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 8: 800 Series

    16” Width Without Connectors 12” Depth CORD LENGTH 9 feet CONNECTORS SAE J1772 Type 1 ENCLOSURE Type 3R Aluminum OPTIONS Wall Bracket Pedestal Mount Branded Door Graphics USER INTERFACE LED Indicators RFID Card Reader Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 9: Parts & Components

    • Stainless over Carbon Steel Pedestal with Legacy EVSE to Gen 3 Bolt Pattern Precast Foundation Package • Concrete Precast Foundation with conduit Sweeps and Stainless Steel Studs • Four (4) Stainless steel Nuts • Four (4) Stainless steel Washers Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 10 • Wrench for wall bracket to wall • Rotory hammer drill • Shims • Sealant • Anchors • EV simulator or an EV • Level Required Breaker Ratings Breakers must be new. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 11 Cord Management System Charger Cord High Visibility Exit Decorative LED Brandable Aluminium Type Door Panel 3R Enclosure Charger LED Charger Connector Status Indicators & RFID Sensor Pedestal Mount Charger Accessory Cord Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 12 WALL MOUNT BRACKET Wall Bracket Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 13: External Components & Assembly

    If you would like to add a wrap after delivery, please contact your JuiceBar Account Representative. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 14: Internal Components & Assembly

    PARTS & COMPONENTS INTERNAL COMPONENTS & ASSEMBLY Latches Locks Ethernet port Charger Decorative LED Core Component Terminal Blocks Breakers User Interface & Antenna Assembly Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 15: Installation Requirements

    Les deux phases doivent mesurer 120V en position neutre. La troisième ligne (L3) de la delta est 208V, à l’égard de neutre, et est parfois appelé “stinger”. N’utilisez pas cette troisième ligne. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 16: Site Selection

    EVSE complies with such requirements. • If the unit is to use a hardwired network connection, this connection must meet or exceed the CAT 5e standard. Double sided models require two hardwired network connections. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 17 SITE SELECTION (continued) Things to Consider when Selecting Locations for JuiceBar Gen 3 Charging Stations • Placement of traffic protection including bollards and/or wheel stops is recommended to protect the EVSE. Bollards Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 18 (continued) Things to Consider when Selecting Locations for JuiceBar Gen 3 Charging Stations • Placement of traffic protection including bollards and/or wheel stops is recommended to protect the EVSE. Wheel Stops Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 19 JuiceBar’s chargers can be equipped with cords of various lengths up to 18’ and may include cord management systems. • Longer and wider parking spaces are preferred to enable optimal cord handling and placement during use. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 20: Mounting Instructions

    Level The Level The Pedestal Pedestal Install Lower Install Lower Flange Nuts Flange Nuts & Washers & Washers Install Seal Leveling Gaps Shims Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 21 Step 2 to secure the enclosure to the pedestal. Ensure the pedestal is aligned with the factory installed gaskets to maintain the environmental seal of the charger enclosure. Install Upper Install Upper Flange Bolts Flange Bolts Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 22 7. Replace the pedestal and tighten the anchors. The anchor has a maximum torque rating of 55 ft lbs. OSI Quad sealant Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 23 Recommended Shims: • 4x 1/2” IDx0.125” 316 stainless steel shim McMaster-Carr: 97022A249 • 2x 1/2” IDx0.045” 316 stainless steel shim McMaster-Carr: 97022A243 • 10x 1/2” IDx0.010” 316 stainless steel shim McMaster-Carr: 97022A380 Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 24 Check local code for required conduit depth. • The stainless steel anchor bolts are pre installed. • The package will include washers and nuts to secure the JuiceBar unit. • The foundation weighs 400lbs. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 25 • Insert the anchor with the threaded end first into the hole. • Place the wall bracket on the wall and insert the bolt into the anchor. • Use a wrench to tighten the anchor to 10ft. lbs. of torque. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 26 Bracket Bottom Shelf Install 36” to 40” Above Ground 2. Mount the bracket so the enclosure will sit plumb to the wall surface using internally threaded concrete and brick style anchor bolt hardware. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 27 Conduit connectors should be selected in accordance with NFPA NEC or as advised by the local authority having jurisdiction. Proper selection and tightening of conduit connectors to maintain a NEMA 3R ingress protection are necessary to maintain the environmental seal of the charger enclosure. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 28: Wiring Instructions

    WIRING INSTRUCTIONS Electrical Service Label breakers and panel Connect the Gen 3 to the electrical supply via a dedicated electrical service breaker. Please ensure the installation follows all local electrical codes. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 29 The following grounded electrical systems are recommended: 220/240V Single Phase 208V 3-Phase, Wye-Connected 240V 3-Phase, Delta-Connected, with center-tap on one leg. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 30 Please consult with your local authority for appropriate guidance on electrical system design including conductor sizing and breaker ratings for the JuiceBar Gen 3 maximum rated power level. Refer to the product specification sheets for rated power levels. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 31 If you selected a network charge management system, the charger will automatically attempt to connect to the network server. Please confirm the commissioning process for your chosen network with your JuiceBar EV account representative. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 32 E. Measure between terminals 6 and 3 or 4 ; the voltage should be 120V F. Measure between terminals 5 and 6 ; the voltage should be 208V-240V If any measured values do not agree with the above steps, check circuit phasing. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 33 In the case of a single circuit supply, turn off the breaker and ensure all voltages at the EVSE measure 0V. Ensure Breaker and panel labeling is correct based on the outcome of the origination test. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 34 WIRING INSTRUCTIONS (continued) Function Test • Call JuiceBar Support (860-308-2054) to activate your charger. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 35: Communications

    Interference (RFI), however, there are some instances where high power radio signals or nearby RF-producing equipment, such as cellular phones, could impact operation. Changes or modifications to this product by other than an authorized service facility may void FCC compliance. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 36: Operating Instructions

    Ce produit est destiné pour une utilisation avec les véhicules conformes à la Society of Automotive Engineers (SAE) norme J1772. Son utilisation pour d’autres applications peuvent endommager le EVSE et/ou le véhicule non conforme Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 37: General Information

    This locking mechanism is typically deactivated by presenting the vehicle key fob near the charging port or by unlocking the vehicle’s doors (drivers should consult their vehicle’s owners manual for instructions on removing EVSE connectors.) Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 38 At this point the retractor is locked. To retract, pull cord out slightly until a pause is heard in the ratcheting mechanism, then walk back to the EVSE with the cord and re-holster the connector. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 39: Network Charger Information

    If payment is required to use the charger, follow the directions from the network. Please access the network mobile app or website for payment instructions. If there are any issues with the payment, call the customer service number supplied by the network. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 40 OPERATING INSTRUCTIONS NETWORK CHARGER INFORMATION (continued) Normal Operations: Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 41: Non-Network Charger Information

    • The solid yellow LED indicator lights will turn solid blue once this process is completed and charging has started. See the user manual label on the side of the charger, and as represented below, for more information. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 42: Troubleshooting

    • Confirm there is no damage to connector, or the charger cord the charging connector or cord and attempt to initiate a session with another vehicle or a J1772 test Unit Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 43 • Confirm the network license for the charger is active. • Verify the cellular signal strength in the area of installation for the appropriate network cellular carrier. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 44 • Check the QR code label for deterioration. Contact JuiceBar for a replacement label if damage or wear is present. REPAIR INFORMATION: 860-308-2054 Support@JuiceBarEV.com Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 45: Maintenance & Repairs

    Ne jamais utiliser d’autre type de tissus abrasifs, de poudre décapante ou solvants inflammables tels que de l’alcool ou le benzène. 3. Pour l’inspection de l’appareil, veuillez contacter un électricien agréé. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 46: General Information

    Please contact JuiceBar for all technical support, service and warranty claims by calling 860-308-2054 or sending an email to support@JuiceBarEV.com. Please have the Charger’s serial number available. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 47: Contact Information

    JuiceBar Gen 3 Charging Station. VISIT OUR WEBSITE FOR FURTHER INFORMATION JuiceBarEV.com JuiceBar and Powering the rEVolution are registered trademarks of Oasis Charger ® ® Corporation. Designed, Engineered and Assembled in the USA Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 48 MAINTENANCE & REPAIRS Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 49: Standard Warranty

    10 business days of when the Purchaser or Lessee becomes aware of a potential defect that may require repair or replacement and must include the information called for in “Conditions of Warranty” below. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 50 Oasis. Failure to return a defective component or Station within ten (10) business days of receiving a replacement component shall result in an invoice to and payment by Purchaser or Lessee for the cost of such component or Station. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 51 Should any of the foregoing conditions not be satisfied, or in the event information or documentation provided by Purchaser or Lessee is materially inaccurate or incomplete, this Warranty shall be void. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 52 (including but not limited to physical damage from being struck by a vehicle) or use of the Charging Stations in a way other than as specified in the applicable Oasis documentation. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 53 MAKES NO OTHER EXPRESS OR IMPLIED WARRANTIES OTHER THAN THOSE SET OUT IN THIS WARRANTY. ALL OTHER WARRANTIES, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF DESIGN, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (EVEN IF OASIS HAS BEEN INFORMED OF SUCH Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 54 Purchaser or Lessee and Oasis with respect to its subject matter, and any modification or waiver of any provision of this statement is not effective unless expressly set forth in writing by an authorized representative of Oasis. Copyright 2020 Oasis Charger Corporation. All rights reserved. ©...
  • Page 56 860-308-2054 | JuiceBarEV.com | 12 South Main Street | Norwalk, CT 06854...

Table of Contents