Do you have a question about the SPOILER EXTENSION and is the answer not in the manual?
Questions and answers
Summary of Contents for MAXTON DESIGN SPOILER EXTENSION
Page 1
Vehicle damage, major bodily injury, disability, and/or death are among the dangers. Any changes you make to your or someone else's car using Maxton Design Ltd. goods are your responsibility. Maxton Design Ltd. is not responsible for any changes made to automobiles as a result of the usage or abuse of its product and will not be held accountable.
Page 3
Page 3 INSTALLATION MANUAL STEP 1 STEP 2 Place the spoiler extension on the spoiler for Place masking tape on the cars spoiler around the initial fitment testing the edges, this will be used to help mark the placement of the product.
Page 4
SPOILER EXTENSION Page 4 INSTALLATION MANUAL STEP 4 Outline the edges of the spoiler extension on the masking tape before removing. STEP 5 STEP 6 Lift the spoiler extension and place it to the Peel back 2-3cm of the 3M tape cover on one side.
Page 5
SPOILER EXTENSION Page 5 INSTALLATION MANUAL STEP 7 Align the spoiler extension with the markings drawn on the masking tape from step 4. Do not put excessive pressure on the product at this point as you will need to further remove the 3m tape.
Page 6
STEP 10 Use a heat gun to slightly heat the spoiler extension. This will further improve how well the 3M tape bonds to the car. Be autious not to use excessive heat as it could cause defmorities to the product.
Page 7
Thank you for choosing Maxton Design! We hope our product will meet your expectations. Let us know if you have any questions. +44 (0) 113 531 6574 sales@maxtondesign.co.uk www.maxtondesign.co.uk 7 Gilhusum Road, Leeds, West Yorkshire, LS27 7FN, United Kingdom...
Need help?
Do you have a question about the SPOILER EXTENSION and is the answer not in the manual?
Questions and answers