Advertisement
SMS-135-.//00(12334!567897:(-7;<=>?23>
1=2(SMS-135-./.00(!3293>(&3;3>>38(@=?7538(A3<<(BC=73(#=;D32>
Installation of the free-standing enclosure requires first installing the enclosure to its mounting surface, then installing the enclosure front panel to the
enclosure and lastly installing the recessed cell phone locker into the enclosure.
Installing Free-Standing Enclosure to Floor
Place the enclosure onto the selected location. Mark the fastener
locations on the mounting surface by transferring the four (4) large
holes locations in the bottom side flanges to the mounting surface.
Remove the enclosure and make the holes for the installation
fasteners. Install the fasteners (not provided). Return the enclosure
to the selected location. Complete the installation of the fasteners.
The use of leveling nuts on stud anchors is suggested.
(
)7>56<<659=7()7>52?;59=7>(
www.StoreMoreStore.com | 1-855-786-7667
Installing Enclosure Front Panel
Install the front panel to the enclosure using #10 x 1/2 in. long screws
(provided). Attach it to the enclosure along the two sides and the
bottom.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Store More SMS-135-19900
- Page 1 SMS-135-.//00(12334!567897:(-7;<=>?23> 1=2(SMS-135-./.00(!3293>(&3;3>>38(@=?7538(A3<<(BC=73(#=;D32> )7>56<<659=7()7>52?;59=7>( Installation of the free-standing enclosure requires first installing the enclosure to its mounting surface, then installing the enclosure front panel to the enclosure and lastly installing the recessed cell phone locker into the enclosure. Installing Free-Standing Enclosure to Floor Installing Enclosure Front Panel Place the enclosure onto the selected location.
- Page 2 SMS-135-.//00(12334!567897:(-7;<=>?23> 1=2(SMS-135-./.00(!3293>(&3;3>>38(@=?7538(A3<<(BC=73(#=;D32> )7>56<<659=7()7>52?;59=7>( Installing Recessed Cell Phone – with Front Access Panel Install the locker unit into the enclosure by sliding it into the enclosure until its front peripheral flange is flush against the front of the enclosure. Open the front panel access compartment of the cell phone locker then open the front panel. Install #8 x 1-1/4 in. long screws (provided) through the slots in the sides of the front peripheral flange of the locker unit into the enclosure.
Need help?
Do you have a question about the SMS-135-19900 and is the answer not in the manual?
Questions and answers