Advertisement
Table of Contents
1.
Place STENCILs in desired location aligned as shown below. Paint with desired color.
Repeat 1-2 more times to achieve desired vividness, drying after each application, and
remove STENCILs. It should look like the illustration to below right.
2.
Once completely dry, align STENCILs wing tips, windshield and numbered circles to
painted pavement as shown. Paint desired colors. Repeat 1-2 more times to achieve
desired vividness, drying after each application, and remove STENCILs. Let dry. It should
like below right.
© 2018 FIT AND FUN PLAYSCAPES, LLC
APPLICATION INSTRUCTIONS
FOR THE
AIRPLANE HOPSCOTCH
Product Number: 18-3W-083
SIZE: approximately 10 feet long x 10 feet wide
ESTIMATED PAINT TIME: approximately 1 – 2 people
for 2 – 4 hours.
FIRST READ: Completely read "General Instructions"
attached to this document. Prepare surfaces as
recommended before painting.
1 of 2
Advertisement
Table of Contents
Summary of Contents for Fit&Fun 18-3W-083
- Page 1 APPLICATION INSTRUCTIONS FOR THE AIRPLANE HOPSCOTCH Product Number: 18-3W-083 SIZE: approximately 10 feet long x 10 feet wide ESTIMATED PAINT TIME: approximately 1 – 2 people for 2 – 4 hours. FIRST READ: Completely read “General Instructions” attached to this document. Prepare surfaces as recommended before painting.
- Page 2 Paint gaps with brushes, freehand, if desired. Repeat 1-2 more times to achieve desired vividness, drying after each application. Painted pavement should appear below left. Align STENCIL of wing detail as shown below right, paint as desired, let dry and align to other side of wing as shown below right.
Need help?
Do you have a question about the 18-3W-083 and is the answer not in the manual?
Questions and answers