Table of Contents
Advertisement
Fault
Appliance interior still wet
after wash cycle.
Food remnants are left on
tableware in the top basket.
Remnants of food on table-
ware.
Cause
Not a fault. The condensa-
tion drying principle causes
water droplets in the tub –
they are indeed desirable
here. The moisture in the air
condenses on the inside
walls, runs off and is
pumped out.
Tableware in the top basket
was placed too close to-
gether or top basket is over-
filled.
Tableware is placed too
close together or basket is
overfilled.
Spray arm rotation is
blocked.
Spray arm nozzles are
blocked.
Filters are soiled.
Filters are inserted incor-
rectly and/or not engaged.
Washing programme selec-
ted too weak.
Tableware has been pre-
cleaned too intensely. The
sensors chose a weaker pro-
gramme. Stubborn soiling
cannot be entirely removed.
Troubleshooting en
Troubleshooting
No action required.
Arrange tableware in the top basket
▶
with sufficient space in between.
Position large items of tableware at
an angle, e.g. pans and ovenproof
dishes.
Activate the Extra Clean Zone
‒
function in the top basket.
→ "Selecting Extra Clean
Zone", Page 25
Arrange tableware with sufficient
1.
space in between.
The spray jets must reach the sur-
faces of the tableware.
Avoid points of contact.
2.
Arrange tableware so that it does
▶
not obstruct spray arm rotation.
Clean the "Spray arms" → Page 45.
▶
Clean the filters.
▶
→ "Cleaning filters", Page 44
Insert the filters properly.
1.
→ "Filter system", Page 44
Engage the filters.
2.
Select a more intensive washing
▶
programme.
→ "Programmes", Page 19
Adjust the sensitivity of the sensors.
▶
→ "Sensors", Page 12
Only remove large remnants of food
▶
and do not prerinse tableware.
Adjust the sensitivity of the sensors.
▶
→ "Sensors", Page 12
51
Advertisement
Table of Contents
