Advertisement
4. OPERATION
IMPORTANT: Only use the cable supplied with the product.
4.1.
CHARGING
4.1.1.
Insert the Micro USB plug into the power inlet on the rear of the lamp (fig.2).
4.1.2.
Plug the other end of the USB cable into a 5V USB outlet.
WARNING! DO NOT turn lamp on whilst charging.
‰
4.1.3.
The charge indicator (fig.2) will blink during charging. When fully charged the indicator will be on continuously.
4.2.
USE OF SPOTLIGHT/LANTERN (Handle arrangement closed)
4.2.1.
Direct the lens away from your eyes, other people and animals before switching on.
4.2.2.
Slide the ON/OFF switch (fig.1) up one 'click' for LOW lantern mode, again for HIGH lantern mode. Once more for spotlight. Slide
the switch back to its starting position to turn the whole unit off.
4.3.
USE OF DESK LAMP (Handle arrangement open)
4.3.1.
Open handle by pressing the head release button on lens housing front face (fig.2).
4.3.2.
Adjust orientation of lamp and arm to suit required illumination. Lamp can be rotated if required (fig.3, fig.4).
4.3.3.
Slide the ON/OFF switch (fig.1) up once for LOW lamp mode, again for HIGH lamp mode. Sliding the switch one more time turns
off the lamp and turns on the torch. Slide the switch back to its starting position to turn the whole unit off.
4.4.
USE OF CHARGING OUTPUT
4.4.1.
Connect the USB cable of device to be charged to the charging output port in the unit's body (fig.2).
Power Inlet / Outlet
Charge indicator
Head
Release
Button
fig.2
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
BATTERY REMOVAL
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme. Jack
Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
Torch
Arrangement
fig.3
01284 703534
sales@sealey.co.uk
Original Language Version
Desk Lamp
Arrangement
fig.4
www.sealey.co.uk
LED140
Issue 1
04/05/2022
Advertisement
