Bosma DS0001 Quick Install Manual

Wireless magnetic door sensor

Table of Contents

Download this manual

Door Sensor

Quick Install Guide

Introduction

DS0001 is a wireless magnetic door sensor developed by BOSMA. It has

real-time detection of door and window opening/closing. Modern

design, smooth lines, very good with home decoration. High sensitivity

within 100 meters distance of the host has a very high sensitivity. There

is a code setting between the door magnetic sensor and the host, and its

unique address code is learned to the host when the code is aligned. This

sensor is a separate trigger type. When the location of the magnet and

the emitter moves more than 2cm, the emitter will immediately send an

alarm signal to the alarm host, which will be pushed to the mobile phone

to inform the user, In case the intruder who tries to sneak in from doors

and Windows.

Type: DS0001

Wireless range (open area): 200 m

Radio Frequency: 915MHZ

Static Voltage: DC 3.0V (Use a button battery)

Current consumption: Static

Current≤10μA

Alarm Current≤25mA

Table of Contents

Do you have a question about the DS0001 and is the answer not in the manual?

Page 1 Door Sensor Quick Install Guide Introduction DS0001 is a wireless magnetic door sensor developed by BOSMA. It has real-time detection of door and window opening/closing. Modern design, smooth lines, very good with home decoration. High sensitivity within 100 meters distance of the host has a very high sensitivity. There is a code setting between the door magnetic sensor and the host, and its unique address code is learned to the host when the code is aligned.
Page 2 Install Guide 1. Add device * First, Set up the device with gateway (BOSMA-X1) according to its instructions and APP guidance to ensure that it is in working state. ⚫ Tap “+”button at the top-right corner to add device ⚫...
Page 3 2. Matters needing attention * Please pay attention to the following situations before installation, so as to avoid failure use after installation. ⚫ Don not install in the outdoor easily damaged location. ⚫ Do not install to the base is not strong. ⚫...
Page 4 Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.