Maplin KF-6 Quick Start Manual

Maplin KF-6 Quick Start Manual

Shed alarm

Advertisement

Quick Links

INSTALLATION

driver Insert into the hole located on the bottom
1 )Use a
of the unit, and depress to unlock the battery cover and slide
it to remove.(fig. l)
2) Insen 3 •AA" batteries (not included), two beeps will sound.
Refit the battery cover
3) Press any key and you will hear the key tone. If this sound is
not hard or is dull
4) For best perf01TN.oce Alkaline b&taies ge
the battaie are
TO SET YOUR OWN PERSONAL CODE: (You have to enter the new code within IS seconds.)
1) Press the •r fi•nction key, that
2) Enta your own pawnal 3 diöt code. The red LED *111 go out, and one long beep 49111 sound to confim your
new code
3) To change your
ADWSTNG THE Tru DELAY
I ) To change the pre-se 3 econd attry dday, pres
of 3, 15, or 30 seconds entry dday by preing then*
your
setting.
2) To c.intze tbe pre-sa 10
choice of I O, 20, or 30 seconds ecit delay by preütg the number 4. 5 or 6 k"
to confirm your setting.
3) To change the pre-set 30
ot300r-60seéondsalum duntion
confirm your sating
R€STALLATION
l) Select the entrance to be protected, but avoid direct aanliøtt or rain
2) The unit is desk and wall mountable. However, for the best deection coverage, the urüt åould be placed
mounted 3 to 7 feet above the floor. The av«age deection coverage provided by the alarm unit is 20 feet in a 89
degree arc.
3) To mount on the wall- Use the supplied screws or the double sided adheive pads to mount the
the location you have sele<ed. Place the unit over the bütay cover and slide the unit omo the battery
NOTE: Whenever you want to remove the battery cover, be
"battery installation"
The visitor chime ffnction will only work in the DISARM mode.
I ) Press the "F" fianction k". then the " Q " bell key, the Ding-Dong chime will play twice to confirm
visitor chime mode.
2) Wait for 15 seconds for unit warm up. Once activated, the unit will sound Ding-Dong twice each
any movement.
3) Place/mount the unit nar the entrance to detect a visitor's entry or exit.
TO DEACTIVATE THE VISITOR CHmE FVNCTION
Press the "F" mnction key, then the " O " bell key . You will hear two beeps to confim the visitor chime
off.

PANIC ALARM

emergetcy, an immediate alarm can be triggered by simultaneously pressing the • F' Ranction key
In the event of
lock key. The alarm will sound for 30 seconds.
and tlE
slurry, replace the battaies.
the pre-set code is 333.
333.
red r FD wül illuninate.
code, follow
above procedure.
ecit delay, press
alarm duration,
Number)
åmction k" thal the•@• time k%'. Select ymar &ice
l, 2 or 3 respectively. One bep wül
ffnction kø
the "F' ftanction key then
Of-bk
to unlock the battery
(fig. 1)
One bep will
tinrk%'-
to the unit.
battery cover on
as described in
time ,it senses
to
select your
or
cover.
the unit is in
is

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KF-6 and is the answer not in the manual?

Questions and answers

Summary of Contents for Maplin KF-6

  • Page 1 INSTALLATION driver Insert into the hole located on the bottom 1 )Use a of the unit, and depress to unlock the battery cover and slide it to remove.(fig. l) 2) Insen 3 •AA" batteries (not included), two beeps will sound. Refit the battery cover 3) Press any key and you will hear the key tone.
  • Page 2 THE ALARM l) Press the u F" function key then theUr-G" lock key The red LED flashes and the beeps for the exit delay time that you have set. Leave the protected area during this time and when the beeps finish the alarm is set. 2) To save battery power, the unit will enter "Conserve"...

Table of Contents

Save PDF