Summary of Contents for ROSITEK RMP2
- Page 1 MANUAL HEAT PRESS MODEL No: RMP2 USER GUIDE AND TROUBLESHOOTING CONTACT Rositek Technologies E-mail；support@rositek.com © 2021 Rositek www.rositek.com All rights reserved...
-
Page 2: Table Of Contents
PAGE 1 USER GUIDE AND TROUBLESHOOTING -- RMP2 TABLE OF CONTENTS PAGE 2 INTRODUCTION Read Before Operating Machinery Disclaimer PAGE 2 SAFETY PRECAUTIONS PAGE 3 HANDLING PRECAUTIONS PAGE 3 UNPACKING Unpacking Precautions Unpacking Instructions Item Checklist PAGE 4 - 6... -
Page 3: Read Before Operating Machinery
USER GUIDE AND TROUBLESHOOTING -- RMP2 PAGE 2 INTRODUCTION RMP2 is Rositek 2-ton manual heat press with a customized leverage system with an extra-long handle. It’s portable, small, and effortless; Solid frame, non-rusting & non-breaking. Thank you for purchasing this Rositek product. -
Page 4: Handling Precautions
2. Examine the device after unpacking for any damage. If found one, take a picture and contact Rositek at support@rositek.com immediately. Before starting, please make sure that the following items are included with ITEM your device. If anything is missing, contact Rositek. CHECKLIST 1. 1pc x Heat Press. 2. 1pc x Power Cord. -
Page 5: Getting Familiar
PAGE 4 USER GUIDE AND TROUBLESHOOTING -- RMP2 GETTING FAMILIAR RMP2 FEATURES AND CONTROLS - FRONT Armrest ① Customized Lever System ④ Made of Blackened Steel Extra-long ② Pressure Handle Pressure Adjusting Knob Frame ⑤ ③ (Clockwise to increase the... -
Page 6: Rmp2 Features And Controls - Back
PAGE 5 USER GUIDE AND TROUBLESHOOTING -- RMP2 GETTING FAMILIAR (continued) RMP2 FEATURES AND CONTROLS - BACK ⑭ Heating Rods Thermocouple ⑬ Power Cord Socket ⑮ © 2021 Rositek Rositek Technologies Email: support@rositek.com All rights reserved www.rositek.com... -
Page 7: Rmp2 Product Size
PAGE 6 USER GUIDE AND TROUBLESHOOTING -- RMP2 GETTING FAMILIAR (continued) RMP2 PRODUCT SIZE Front View Size (mm) Left view size(mm) © 2021 Rositek Rositek Technologies Email: support@rositek.com All rights reserved www.rositek.com... -
Page 8: Operating Instructions
PAGE 7 USER GUIDE AND TROUBLESHOOTING -- RMP2 OPERATING INSTRUCTIONS PREPARING 1. Prepare materials you wish to press. PRESS 2. Make sure the press stands on a shorter flat workbench or ground. 3. Ensure the press is clean and free of residue or dust buildup. - Page 9 PAGE 8 USER GUIDE AND TROUBLESHOOTING -- RMP2 OPERATING INSTRUCTIONS (continued) PID DEFAULT PARAMETERS FOR RMP2 d=0060 AL1=0030 ATU=0000 P=0030 I=0240 Ar=0080 5C=0000 T=0002 LCk=1000 Tips: We do not recommend changing the internal parameters, it will cause a lot of problems.
-
Page 10: Setting Control Panel
PAGE 9 USER GUIDE AND TROUBLESHOOTING -- RMP2 OPERATING INSTRUCTIONS (continued) The PID control panels are used to set temperature for deal heated platen. SETTING Please follow the steps below to record the desired settings: CONTROL PANEL 1. Use “SHIFT” key to shift left and right position. -
Page 11: Turning Off Press
PAGE 10 USER GUIDE AND TROUBLESHOOTING -- RMP2 OPERATING INSTRUCTIONS (continued) TURNING OFF 1. Turn the machine off by flipping ON / OFF switch when done pressing. PRESS 2. Unplug and then disconnect the power cord from the press. 3. Wait until the press cools down completely to clean and store it. -
Page 12: Warranty
PAGE 11 USER GUIDE AND TROUBLESHOOTING -- RMP2 WARRANTY We provide One Year Warranty. Please contact Rositek at support@rositek.com immediately of any issues with the product.We will attempt to troubleshoot the product and solve your issue in a timely manner.
Need help?
Do you have a question about the RMP2 and is the answer not in the manual?
Questions and answers