Table of Contents
Summary of Contents for Santiva Outdoors GOFR Livewell Adapter
- Page 1 GOFR Livewell Adapter Owner’s Manual WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov.
- Page 2 GOFR Livewell Adapter Owner’s Manual The GOFR Livewell Adapter allows you to convert most hard coolers, round or rectangular buckets into a livewell. Please follow the instructions below and please read all warnings and tips to ensure the best results.
- Page 3 GOFR Livewell Adapter Owner’s Manual HARD COOLER CONVERSION STEP 1: • Screw Core (P2) into a hard cooler drain port. Secure firmly by hand tightening. STEP 2: • From the inside of the cooler, place a loosened Hose Clamp (P9) over the Core (P2) as shown.
- Page 4 GOFR Livewell Adapter Owner’s Manual STEP 4: • Assemble Drain Elbow (P13), and Drain Tube (P7) using adapter. Install assembly on the large drain nipple of the Bellhousing (P1) with the Drain Tube (P7) pointed vertically. TIP: Cut the Drain Tube (P7) to desired water level, and install Drain Suction Cup (P15).
- Page 5 GOFR Livewell Adapter Owner’s Manual STEP 2: • Turn the bucket upside down and use the Hole Saw (P12) and electric drill to cut a hole in bucket. Keep the drill perpendicular to the bucket while drilling. WARNINGS - Make sure the surface area is clean and safe.
- Page 6 GOFR Livewell Adapter Owner’s Manual STEP 7: • Assemble Elbow (P13), and Drain Tube (P7) using adapter. Install assembly on the large drain nipple of the Bellhousing (P1) with the drain tube pointed vertically. TIP: Cut the Drain Tube (P7) to desired water level, and install Drain Suction Cup (P15).
Need help?
Do you have a question about the GOFR Livewell Adapter and is the answer not in the manual?
Questions and answers