Summary of Contents for Scroll Trellis Stack Trellis 2 Tier Plant Support
Page 1
Thank You for purchasing this Easy assembly, only tool needed is garden pruners product! Right Turn MN, LLC Check out our other DBA Scroll Trellis exclusive & creative 5241 130 St. N. Suite #8 Hugo, MN 55038 products at www.scrolltrellis.com scrolltrellis.com...
Page 2
Insert two Cable Ties through the Small Holes that are Position one “X” onto opposite each the Stand-Off Tube and other on the Legs align the four “X” Legs of the “X”, repeat with each of the four for the second “X”. “peeled back”...
Page 3
Trim the Legs of Bottom “X”(as shown below) so that they fit the inside wall of the container, keeping the Keyhole or if using in Bend and twist the end of one of the “X” the garden, trim the legs to about 10 inches Legs and insert into the Keyhole on the (keeping the Keyhole).
Page 4
Insert a stake down Build another trellis the Stand-Off tier by repeating Tube. Recommended Steps 1 through 7. Stake from Home Depot (see info Front Page ) Slide Stand-Off Tube over stake and secure the 4 Push Stake all the way to Stand-Off Tube legs with the bottom of the Planter Cable Ties and the “X”...
Need help?
Do you have a question about the Stack Trellis 2 Tier Plant Support and is the answer not in the manual?
Questions and answers