Listening To Fm Radio - Oglo# MS-O-700-D User Manual

Programming a playlist
When the mini-stereo is stopped, press the button PROGRAM, then select the desired track number
•
using the buttons
Repeat as often as necessary (99 tracks maximum). Then press
•
the order you have defined.

listening to FM radio

Connect the antenna cable supplied to the back of the mini-stereo, and extend it fully.
1.
Turn on the mini-stereo, and select the FM TUNER source by pressing the button
2.
stereo several times or the button SOURCE on the remote control.
Performing a full scan on the FM band
When the appliance is turned on, briefly press the button AUTO on the remote control or the
1.
button of the mini-stereo to perform a full scan on the FM band. The first thirty stations found are
stored.
Search for a radio station automatically
Press and hold the button TUN - or TUN + to perform a scan.
1.
FM scanning stops when a radio station has been found.
2.
You can then briefly press the button TUN - or TUN + on the remote control to refine your search, as
3.
indicated in the paragraph below.
Searching for a radio station manually
Briefly press the buttons TUN - or TUN + on the remote control until the optimal reception frequency
1.
is reached.
Each time the buttons TUN - or TUN + are pressed, the frequency increases / decreases by 0.05 MHz.
2.
If reception is poor, adjust the FM antenna position or change the frequency.
3.
24
and . Then press PROGRAM again and select another track number.
to start playback. Playback is in
on the mini-