Advertisement
Quick Links
IOM-STR1
Description
The Abtech STR1 range of roadway lanterns are manufactured in Aluminium with a toughened glass
window and silicone rubber gaskets providing sealing. The type of protection is Ex ec, Increased
Safety.
Application
The luminaire is suitable for use in a Zone 2 area, gas and dust hazards, and reference should be
made to the rating table below in respect of T rating and ambient temperature considerations.
The luminaire is designed for use in areas not subject to levels of vibration or shock above those
considered normal for fixed installations. Care should be taken, not to expose the gasket(s) to high
concentrations of hydrocarbon vapours.
'This equipment uses an external non-metallic coating. To avoid the build-up of an electrostatic
charge clean only with a damp cloth.'
Refer to apparatus certificates (supplied with luminaire and available at www.abtech.eu) for details
of certification, coding, conditions for safe use.
Refer to apparatus label for warnings
Luminaire Ratings
Product
Reference
Temperature (K)
LX2STR1120SH
Operating Parameters
Product Reference
LX2STR1120SH
Abtech Ltd
Newhall Road
Sheffield, S9 2QJ
United Kingdom
STR1 Roadway Lantern
ABT 15ATEX4111
Installation, Operation and Maintenance Instructions
Colour
Ambient Temp
4000
-50°C to +55°C
Lamp
LED
Power
Current
120W
0.7A
Power
Temp Class and Surface Temp
(W)
120
Input Voltage
90 to 305 Vac
IOM-STR1 ABTQ210.docx
Page 1 of 6
T4
T135
o
Input Frequency
50Hz to 60Hz
Weight
(kg)
C
11
Power factor
Correction
>0.95
t : +44 (0) 114 244 2424
f : +44 (0) 114 243 4312
e : sales@abtech.eu
Advertisement
Summary of Contents for Abtech STR1 Series
- Page 1 ABT 15ATEX4111 Installation, Operation and Maintenance Instructions Description The Abtech STR1 range of roadway lanterns are manufactured in Aluminium with a toughened glass window and silicone rubber gaskets providing sealing. The type of protection is Ex ec, Increased Safety. Application The luminaire is suitable for use in a Zone 2 area, gas and dust hazards, and reference should be made to the rating table below in respect of T rating and ambient temperature considerations.
- Page 2 Supply voltage variation must not exceed ±6% and the luminaire should not be operated continuously beyond this limit. In any case the voltage variation must NEVER exceed ±10% as this will invalidate the certification and could lead to the product being unsafe. If in doubt, advice should be sought from Abtech technical department.
-
Page 3: Luminaire Dimensions
4. Gasket Replacement The unit gasket is one-piece silicone rubber and can only be obtained from Abtech. The old gasket should be removed and any traces of sealant cleaned off. The area where the gasket is situated should be clean and free from grease. - Page 4 IOM-STR1 2. Mounting options 3. Installation Abtech Ltd Newhall Road IOM-STR1 ABTQ210.docx t : +44 (0) 114 244 2424 Sheffield, S9 2QJ Page 4 of 6 f : +44 (0) 114 243 4312 United Kingdom e : sales@abtech.eu...
- Page 5 IOM-STR1 Abtech Ltd Newhall Road IOM-STR1 ABTQ210.docx t : +44 (0) 114 244 2424 Sheffield, S9 2QJ Page 5 of 6 f : +44 (0) 114 243 4312 United Kingdom e : sales@abtech.eu...
- Page 6 Lamps must not be incinerated. Lamps should be disposed of in accordance with local or national Abtech Ltd Newhall Road IOM-STR1 ABTQ210.docx t : +44 (0) 114 244 2424 Sheffield, S9 2QJ Page 6 of 6 f : +44 (0) 114 243 4312 United Kingdom e : sales@abtech.eu...